TRU 8885 SERIES OWNER'S MANUAL - C. Crane Company

More documents

Recommendations

Info

Global Setup If you change one of the global settings, you change that setting for all additional handsets. Only one handset can change global settings at a time. Setting Day and Time Day & Time sets the day and time of your display. 1) Enter the Global Setup menu, and then the Day & Time submenu option (see "Entering the Menu" on page 16). 2) Press volume up/down to select the day of the week, and then the →soft key. 3) Press volume up/down to set hour, and then press the →soft key. 4) Press volume up/down to set minute, and then press the →soft key. 5) Press volume up/down to choose AM or PM, and then press the SAVE soft key. You will hear a confirmation tone. note •Any changes to the global settings menu affect all registered handsets and the base. •For setting the Day and Time, the idle time-out is extended to 2 minutes. GETTING STARTED www.uniden.com GETTING STARTED [29]
Setting CIDCW (Caller ID on Call Waiting) CIDCW sets the Caller ID on Call Waiting (CIDCW) displays the name and number of an incoming call while you are on the line. Call Waiting Deluxe (CWDX) allows you to handle call waiting calls in seven different ways. 1) Enter the Global Setup menu, and then the CIDCW submenu (see "Entering the Menu" on page 16). 2) Press volume up/down to select CW On/CWDX On, CW On/CWDX Off, or CW Off/CWDX Off, and then press the OK soft key. You will hear a confirmation tone. note If the area code has already been stored in memory, the stored area code will be displayed. To change it, use the DELETE soft key and number keys to enter the new area code. Setting the Area Code If you enter a 3-digit area code number in the "Area Code" option, your local area code does not appear in the Caller ID message. For calls received from outside your local area code, you will see a full 10-digit number. 1) Enter the Global Setup menu, and then the Area Code submenu (see "Entering the Menu" on page 16). 2) Press the number keypad (0-9) to enter a 3-digit area code. 3) Press the OK soft key. You will hear a confirmation tone. [30] GETTING STARTED www.uniden.com
Page 1 and 2: TRU 8885 SERIES OWNER'S MANUAL
Page 3 and 4: Welcome Features Congratulations on
Page 5 and 6: Controls & Functions 1 2 3 4 5 6 7
Page 7 and 8: Display and Icons Example of the st
Page 9 and 10: Soft Key Function "Soft" keys are k
Page 11 and 12: note •Use only the Uniden (BT-446
Page 13 and 14: note •Use only the supplied [AD-8
Page 15 and 16: Direct wall mounting If you don't h
Page 17 and 18: Setting Menu Options Entering the M
Page 19 and 20: note •This is an example, if you
Page 21 and 22: Distinctive Ringer Setup (Handset o
Page 23 and 24: Setting the True Banner (Handset on
Page 25 and 26: note •The greeting must be more t
Page 27 and 28: 3) Press the OK soft key. You will
Page 29: Setting the Language of your Answer
Page 33 and 34: De-register the Handset (Handset on
Page 35 and 36: note •If the battery pack is comp
Page 37 and 38: Adjusting the Ringer, and Earpiece
Page 39 and 40: note •The tone feature only appli
Page 41 and 42: When speaking on the base 1) Press
Page 43 and 44: note •If you choose not to store
Page 45 and 46: note If the next character uses the
Page 47 and 48: Making Calls Using the Phonebook Fr
Page 49 and 50: note If the memory location on the
Page 51 and 52: note The number of calls from the s
Page 53 and 54: note You cannot make a call from th
Page 55 and 56: note •To activate features and di
Page 57 and 58: note •When the answering system i
Page 59 and 60: note The time stamp will not be hea
Page 61 and 62: 3) To delete all messages, press de
Page 63 and 64: note If you press the SCREEN soft k
Page 65 and 66: note •Time stamp will not be hear
Page 67 and 68: note •Charge the handset battery
Page 69 and 70: note Handsets can be in Direct Link
Page 71 and 72: From the base to a handset 1) In st
Page 73 and 74: Changing the Digital Security Code
Page 75 and 76: Note on Power Sources Battery repla
Page 77 and 78: Troubleshooting If your phone is no
Page 79 and 80: Symptom No sound on the base unit s
Page 81 and 82:
Precautions! Before you read anythi
Page 83 and 84:
I.C. Notice TERMINAL EQUIPMENT NOTI
Page 85 and 86:
Memo [84] www.uniden.com
Page 87 and 88:
Remote Operation Card CUT REMOTE OP
Page 89 and 90:
Main Menu Flow Chart •From standb
Page 91 and 92:
At Uniden, we'll take care of you!
show all

TRU 8885 SERIES OWNER'S MANUAL - C. Crane Company

Create successful ePaper yourself

Delete template?

Save as template?