TRU 8885 SERIES OWNER'S MANUAL - C. Crane Company

Redialing a Call
The last three phone numbers dialed can be quickly
redialed from the handset or base.
1) Press the REDIAL soft key in standby mode.
2) Press volume up/down. Each press of volume
up/down will display one of the last three number
redialed.
3) Press talk/flash or speaker on the handset (or speaker
on the base). The selected number is dialed.
4) To hang up, press end (or speaker on the base).
Deleting a Redial Record (Handset only)
1) Press the REDIAL soft key in standby mode.
2) Press /vol/ or /vol/ repeatedly to display
the number to be deleted.
3) Press the DELETE soft key.
4) Press /vol/ or /vol/ to choose Yes.
5) Press the OK soft key. The redialed number is deleted.
Storing a Redial Record (from the handset only)
1) Press the REDIAL soft key in standby mode.
2) Press /vol/ or /vol/ repeatedly to display the number to be stored.
3) Press STORE. Store/Edit Name appears.
4) To complete the setting, follow the steps 3-8 in "Phonebook (Storing Phone
Numbers, Names, Distinctive Rings, and Speed dial)" on page 41.
www.uniden.com
/vol/ or /vol/
/vol/ or /vol/
note
•If the number exceeds
32 digits, only the first
32 digits are retained
in redial memory.
•If the redial memory is
empty, you will hear a
beep.
•Redial numbers stored
in the handset and the
base are independent
from each other.
BASICS [35]
BASICS