TRU 8885 SERIES OWNER'S MANUAL - C. Crane Company

Intercom/Call Transfer Feature
Intercom and Call Transfer features are available for your phone.
Intercom
From handset to handset or handset to the base
1) In standby mode, press intcom/hold.
2) Select the base or the handset you want to talk with
within 30 seconds. To select the handset (or the
base), press /vol/∧ or /vol/∨ , and then press
the OK soft key. If you select All, all other handsets
and the base will be paged. An intercom tone sounds.
To cancel intercom, press the CANCEL soft key.
3) To answer the page on a handset, press talk/flash,
intcom/hold, or the ANSWER soft key. If Any Key
Answer is enabled, pressing a number key,
*/tone/ will answer the page. If AutoTalk is enabled, you
can answer the page by simply picking up the handset.
To answer a page from the base, press intercom/hold, speaker, or the ANSWER
soft key.
4) To hang up the intercom call, press end or the END soft key on either handset (or
the END soft key or intercom/hold on the base).
www.uniden.com
note
•If the party is busy or
out of range, the
handset returns to
standby mode.
•If any you receive an
outside/intercom call
or page while selecting
the other handset (or
the base), the
operation will be
canceled.
•If the party does not
answer within one
minute, the operation
is canceled.
EXPANDING YOUR PHONE [69]
EXPANDING YOUR PHONE