TRU 8885 SERIES OWNER'S MANUAL - C. Crane Company

4) To speak to the caller, press talk/flash on the receiving handset or speaker on
the base.
From the base to a handset
1) During a call, press intercom/hold on the base. The call will automatically be
placed on hold.
2) Select the handset you want to talk with within 10 seconds. To select the
handset, press /volume/ or /volume/ and then press the OK soft key.
If you select All, all handsets will be paged. An intercom tone sounds. To cancel
the transfer, press intercom/hold, speaker or the CANCEL soft key on the base.
3) To answer the page on a handset, press talk/flash, intercom/hold, or the
ANSWER soft key. If Any Key Answer is enabled, pressing a number key, * /tone/
will answer the page. If AutoTalk is enabled, you can answer the page
by simply picking up the handset.
4) To speak to the caller, press talk/flash on the receiving handset.
www.uniden.com
EXPANDING YOUR PHONE [71]
EXPANDING YOUR PHONE