Operating Instructions MxxMA-MxERA Three-phase AC ... - Lenze

More documents

Recommendations

Info

4 Technical data General data and operating conditions 4 Technical data 4.1 General data and operating conditions General data Conformity and approval Conformity CE 1) 2006/95/EC Low−Voltage Directive 2009/125/EC ErP Directive Approvals File No. E210321 UL/CSA CCC 1) Does not apply to all products, 11 Protection of persons and equipment Degree of protection IEC/EN 60034−5 See nameplate Degrees of protection only apply to horizontal installation All unused plug−in connections must be sealed with protective caps or dummy connectors. Thermal class F (155 °C) IEC/EN 60034−1 Exceedance of the temperature limit weakens or destroys the insulation Permissible voltage According to limiting curve A of the pulse voltage from IEC / TS 60034−25 (image 14) EMC Noise emission IEC/EN 61800−3 Depending on the controller, see documentation for the Noise immunity controller. <strong>Operating</strong> conditions Ambient conditions Climatic Transport IEC/EN 60721−3−2 2K3 (−20 °C ... +70 °C) Storage IEC/EN 60721−3−1 1K3 (−20 °C ... +60 °C) < 3 months 1K3 (−20 °C ... +40 °C) > 3 months Operation IEC/EN 60721−3−3 3K3 (−20 °C ... +40 °C) Without brake 3K3 (−10 °C ... +40 °C) With brake 3K3 (−15 °C ... +40 °C) With power reduction > +40 °C With power reduction see, catalogue Site altitude < 1000 m amsl − without power reduction > 1000 m amsl < 4000m amsl with power reduction, see catalogue Humidity Average relative humidity 85 %, without condensation Electrical Motor connection dependent on the controller ( 33) Length of motor cable Length of cable for speed feedback Mechanical IEC/EN60721−3−3 inverter instructions 3M6 24 BA 33.0005−EN 2.0
Mechanical installation Important notes 5 5 Mechanical installation 5.1 Important notes Danger! Some of the motors mounted to the gearboxes are equipped with transport aids. They are only intended for the mounting/dismounting of the motor to the gearbox and must not be used for the entire geared motor! ƒ ƒ ƒ Only move the drive with means of transport or hoists that have sufficient load−bearing capacity. Ensure safe fixing. Avoid shocks! BA 33.0005−EN 2.0 25
Page 1 and 2: BA 33.0005−EN .J), L−force Ä.J
Page 3 and 4: Contents i 1 About this documentati
Page 5 and 6: About this documentation 1 1 About
Page 7 and 8: About this documentation Notes used
Page 9 and 10: Safety instructions General safety
Page 11 and 12: Safety instructions Application as
Page 13 and 14: Product description Identification
Page 23: Product description Identification
Page 27 and 28: Mechanical installation Preparation
Page 29 and 30: Mechanical installation Spring−ap
Page 31 and 32: Mechanical installation Spring−ap
Page 33 and 34: Electrical installation Three−pha
Page 35 and 36: Electrical installation Wiring acco
Page 37 and 38: Electrical installation Plug connec
Page 39 and 40: Electrical installation Plug connec
Page 41 and 42: Electrical installation Terminal bo
Page 43 and 44: Commissioning and operation Functio
Page 45 and 46: Maintenance/repair Maintenance inte
Page 47 and 48: Maintenance/repair Maintenance oper
Page 49 and 50: Maintenance/repair Maintenance oper
Page 51 and 52: Maintenance/repair Installation of
Page 53 and 54: Maintenance/repair Installation of
Page 55 and 56: Maintenance/repair Repair Assembly
Page 57 and 58: Troubleshooting and fault eliminati
Page 59 and 60: Notes BA 33.0005−EN 2.0 59

Operating Instructions MxxMA-MxERA Three-phase AC ... - Lenze

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?