70 Series Maintenance Training Manual - Automation Service Srl

2. Maintenance Screens
2.1 Input/Output Screen
2.1.2 Selecting a Device, Directory and File
File selection sequence
Designate the device where the target file is located.
↓
Designate the directory with a full path.
↓
Designate the file name.
→ Select from the sub menu.
→ Input the full path or select from the list.
→ Input the file name or select from the list.
Menu used
Device select menu's submenus
Menu Details Type Reference
Memory
HD
Serial
This selects the NC memory (program, parameter, user PLC, NC
data).
This selects the hard disk.
This menu is only for 700 series.
C -
C -
This selects the RS-232C device (PC, tape, etc.). C -
Memory
card
DS
Ethernet
This selects the front IC card. C -
This selects the NC compact flash memory.
This menu is only for 700 series.
C -
This selects the Ethernet-connected host computer. C -
FD
Anet
server
This selects the floppy disk.
This menu is only for 700 series.
This selects the Anshin-net server.
C -
C
Dir (other than memory) and File name menu submenus
Menu Details Type Reference
From
list
The cursor appears in the list display. The list contents can be
selected with the INPUT key.
When a directory is selected, the contents of the selected directory
are displayed in the list. Continued selection is possible.
When a file name is selected, the file name is temporarily displayed in
the input area. When the INPUT key is pressed again, it is fixed.
A -
13