70 Series Maintenance Training Manual - Automation Service Srl
70 Series Maintenance Training Manual - Automation Service Srl
70 Series Maintenance Training Manual - Automation Service Srl
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. <strong>Maintenance</strong> Screens<br />
2.1 Input/Output Screen<br />
2.1.5 Formatting an External Device<br />
Operation method (Formatting an FD) [<strong>70</strong>0 series only]<br />
(1) Insert a floppy disk in the FD drive, and<br />
press FD format .<br />
A message confirming the formatting appears.<br />
(2) Press Y or INPUT . The FD is formatted.<br />
A message appears when the formatting is completed.<br />
(Note 1) The FD is formatted with FAT (1.44MB).<br />
(Note 2) The volume label is set when formatting the FD.<br />
Operation method (Formatting a memory card)<br />
(1) Press the menu MemCrd format . A message confirming the formatting appears.<br />
(2) Press Y or INPUT . The memory card is formatted.<br />
A message appears when the formatting is completed.<br />
(Note 1) The memory card is formatted with FAT16.<br />
(Note 2) The volume label is set when the memory card is formatted.<br />
Operation method (Formatting a DS) [<strong>70</strong>0 series only]<br />
First, press the menu<br />
DS format . Refer to "Formatting a memory card" for following operations.<br />
(Note 1) The DS is formatted with FAT16.<br />
(Note 2) Only the DS formatted with FAT16 can be used. The DS with NTFS cannot be used.<br />
(Note 3) As for the DS formatted with NTFS, reformat it with FAT formatted by Windows to use.<br />
(NC cannot convert NTFS partition to FAT formatted.)<br />
(Note 4) The volume label is not set even when the DS is formatted.<br />
2.1.6 List of File Names<br />
There is a directory for each type of data in the NC memory.<br />
Each directory and file name (fixed) in the NC memory is shown below.<br />
Do not change the extensions (.XXX) when storing in a device other than the NC memory.<br />
Data type NC memory directory path Fixed file name<br />
Machining program /PRG/USER (Program No.)<br />
Fixed cycle program /PRG/FIX (Program No.)<br />
Parameters<br />
Parameters [User, machine] (Text format)<br />
Auxiliary axis parameter (<strong>70</strong>0 series only)<br />
/PRM<br />
ALL.PRM<br />
AUXAXIS.PRM<br />
User PLC /LAD USERPLC.LAD<br />
NC data<br />
Tool compensation amount data<br />
Tool life management data<br />
Common variable data<br />
SRAM data<br />
/DAT<br />
TOOL.OFS<br />
TLIFE.TLF<br />
COMMON.VAR<br />
SRAM.BIN<br />
System configuration data /DGN ASSEMBLY.INF<br />
Decryption code /RLS PASSCODE.DAT<br />
Sampling data /LOG NCSAMP.CSV<br />
Machine data /DGN COMPO.STA<br />
23
Change language