70 Series Maintenance Training Manual - Automation Service Srl

2. Maintenance Screens
2.1 Input/Output Screen
Selecting a device file other than the NC memory
(1) Press the menu Device select . The following menu appears.
(When specifications of all devices is valid.)
(2) Select a device. The device name appears. The root directory is
selected as the default.
(3) Designate the directory.
Select the menu Dir
The mode changes to the mode for inputting the
directory name.
The following menu appears.
(4) Input the directory path as a full path.
/PRG/PRECUT INPUT
(4)-1 Press the menu From list The cursor appears in the list.
(4)-2 Move the cursor to directory to be
selected, and fix.
, , INPUT
The selected directory appears in the data setting
column.
The contents of the selected directory appear in the
list.
Repeat this operation until the target
directory is reached.
When the target directory is reached,
press the key and quit the mode for
inputting the directory.
17