2013 AGCO Application Parts & Accessories Catalog - AGCO Parts

Nozzle Accessories
SpotOn Sprayer Calibrator
Provides quick and accurate flow rate
checking of individual sprayer nozzles.
Avoid costly over or under application
of chemicals!
Features:
• Simple waterproof design has no
moving parts
• Shows readings in either GPM, oz/
min, or Liter/min
• Easy one handed operation
• Clear design allows for easy cleaning and trouble shooting
Benefits:
• Quickly find worn spray nozzle tips – Industry guidelines recommend
tip replacement once flow rate exceeds that of a new tip by 10%.
• Accurately measure true tip flow rate – Today’s high tech sprayers
can only be properly calibrated and confirmed with this knowledge.
• Fast and simple operation – Readings in 10 seconds or less per tip.
| Part | Description |
| AG428355 | Sprayer Calibrator 0-1 GPM |
| AG428356 | Sprayer Calibrator 1- 4 GPM |
Aspirator End Cap
A new enhancement has been incorporated on
new model year RoGator liquid systems with
stainless steel boom plumbing to reduce the
spray shut-off time. It consists of an end cap fitting
that is added to both ends of each boom tube
to bleed trapped air from the boom plumbing.
The end cap fittings may be retro-fitted on machines
with 1-inch boom plumbing using an available boom rework kit.
Features and Benefits
• Reduce spray tip shut-off times by up to 60%
• Economical solution to an industry-wide problem!
• Less boom cleaning required because the last nozzle body is located
at the end of the boom pipe section
• No moving parts to break or clog.
• Passive system requires no electronic or pneumatic power. No changes
to the plumbing, flow controls, or electronics needed.
• Porting in the fitting enables full drain out of the boom pipe at clean-out.
• Convenient Field Accessory Kit includes everything needed to install
aspirator end caps on most RoGators with Stainless Steel boom plumbing.
| Part | Description |
| 549498D1 | Field Accessory Kit - Includes Boom Rework Kit |
| | and 30 End Caps |
| 548601D1 | Aspirator End Cap |
| 549499D1 | Boom Rework Kit - Includes retrofit template |
| | with instructions |
| 554131D1 | End Cap Service Kit - Includes replacement |
| | retaining clamp & seals |
Type TT Nozzle Bodies
Type TT body has male threads on both ends.
Inlet sizes are shown and outlet thread is always
11/16"-16 to fit TeeJet nozzle caps.
| Part | Description |
| AG001618 | 1/8" Inlet Brass |
| AG001610 | 1/4" Inlet Brass |
| AG001833 | 1/4" Inlet Nylon |
| AG051447 | 1/4" Inlet Nylon |
| AG001609 | 1/4" Inlet SS |
| AG054055 | 1/2" Inlet Brass |
Type T Nozzle Bodies
Type T body has female threaded inlet.
| Part | Description |
| AG001617 | 1/8" Inlet Brass |
| AG001605 | 1/4" Inlet Brass |
| AG001920 | 1/4" Inlet Nylon |
| AG001606 | 1/4" Inlet SS |
Threaded Nozzle Caps
11/16-16 Female Nozzle Thread Caps.
| Part | Description |
| AG001613 | Nozzle Cap - Brass |
| AG001832 | Nozzle Cap - Nylon |
| AG006606 | Nozzle Cap - Nylon Winged |
| AG005189 | Nozzle Cap - Nylon Extra Long |
| AG001614 | Nozzle Cap - Aluminum |
| AG001615 | Nozzle Cap - Stainless Steel |
| AG001718 | Tip Gasket - Optional |
Plug Tips
To shut off selected nozzles or change spacing of
operating nozzles on the boom.
| Part | Description |
| AG001629 | Brass |
| AG001630 | Stainless Steel |
TeeJet Nozzle Strainers
| Part | Description |
| AG001834 | 50 Mesh Nylon - Red |
| AG001835 | 100 Mesh Nylon - Green |
| 6630911 | 50 Mesh Brass |
| 6630912 | 100 Mesh Brass |
| AG001734 | 50 Mesh SS |
| AG001621 | Replacement Screen Only - 50 Mesh SS |
| AG001622 | Replacement Screen Only - 100 Mesh SS |
182