2013 AGCO Application Parts & Accessories Catalog - AGCO Parts

RFM400 Repair Parts
SCS 330/440 Control Kits with Console
and AccuFlow Systems
If you need a 330 or 440 console for an AccuFlow System, order from
below. Control kits include flowmeter (No. AG719168) and control valve
(No. AG715184).
| Part | Description |
| AG715669 | SCS 330 Control Kit for NH3 (less speed sensor) |
| AG059895 | SCS 440 Control Kit for NH3 (less speed sensor) |
| AG428519 | AccuFlow Kit 30, GPM (7,596 lbs./hr.) |
| Ref | Part | Description |
| 4 | AG708715 | O-Ring Viton |
| 6 | AG713651 | Inlet Hub |
| 7 | AG713650 | Rotor |
| 8 | AG713649 | O-Ring, Viton |
| 13 | AG009468 | End Bearing and P.C. Assembly Kit |
| 15 | AG713653 | Spacer |
| 17 | AG050394 | End Bearing Assembly |
| 19 | AG714986 | Screw 2 - 56 x 1/2 in SS |
| | AG426552 | P.C. Assembly |
| | AG710719 | Cable Kit |
Flowmeter Magmeter
Magmeter 200 Assembly.
• No Moving Parts • 3-200 gallon operation range
• M220 flange connection
• Compatible with most Ag Chemicals
• No maintenance design nothing to wear out
• Wide operating range can replace RFM100 and
RFM200
• Excellent for suspension fertilizer and calcium applications
• 4" Magmeter Assembly (35-1,500 GPM)
• 6" Magmeter Assembly (70-3,000 GPM)
| Part | Description |
| 526572D1 | Magmeter 200 Assembly |
| AG428245 | 3" Magmeter Assembly (22-1,000 GPM) |
| AG427120 | 4" Magmeter Assembly |
| AG427520 | 6" Magmeter Assembly |
AccuFlow by Raven for Anhydrous Ammonia
The AccuFlow system converts all gas
to a liquid so automatic rate control can
be achieved through the use of an
SCS-440 or 330 control console.
Notes: The following systems are for a
440 console with revision letter A
through G and require a carbon steel control valve (No. AG427291) and
flowmeter (No. AG719168). Order if not present in your existing system.
| Part | Description |
| AG428522 | AccuFlow Kit, 30 GPM (7,596 lbs./hr.) |
| AG427278 | AccuFlow Gasket Retainer Kit |
AccuFlow Kits for Later Raven Consoles
For a 440 console with revision H or a 330 console requires a carbon
steel valve (No. 715184) and flowmeter (No. 719168). Order if not present
in your existing system.
| Part | Description |
| AG428519 | AccuFlow Kit 30, GPM (7,596 lbs./hr.) |
AccuFlow HP
Getting more out of your NH3 applications
with greater accuracy, flexibility—and
savings. Raven has
raised NH3 application technology to
new levels of performance by adding
AccuFlow HP (high performance) to
its AccuFlow line with the industry’s first variable-rate speed pump for
incredible efficiency and reliability. The new AccuFlow HP system is
uniquely designed for unrivaled capacity—the kind you need to run at
higher speeds and colder temperatures than ever before. Paired with one
of our Raven control systems, AccuFlow HP super cooling NH3 technology
gives you superior accuracy and control over your applications for
higher yields, less waste and lower input costs. It’s that simple.
Key Features and Benefits:
• Six-section NH3 control with Raven’s AccuBoom and Switch Pro automatic
on-off and VRA section control technology for maximum savings,
efficiency and performance
• Your choice of valve options to match your farming needs and budget
• Two-valve option for maximum precision and performance—one valve
opens/closes the system and the other controls the flow rate. Ideal for
variable rate applications
• Single fast-valve option for a lower cost alternative with trusted savings
and precision
• Convenient cooler disassembly for easier cleaning and maintenance,
long life, and superior performance and reliability
• NH3 monitoring options in gallons or pounds per acre for your preference/situation
• Space-saver plumbing kits for both the two-valve and fast-valve systems
for added convenience when space is limited
• Industry-first variable speed pump for incredible efficiency, tractor power
savings of up to 10 horsepower, and less wear and tear on your system
(Patent Pending)
• Advanced system design for running at faster application speeds and
colder temperatures—and delivering faster, industry-leading ROI!
• Nearly double the system capacity for taming the heaviest, most
demanding situations
• Super cooler technology for maintaining the right temperature for more
precise NH3 metering and application
• ISO compatible
Notes: *Includes Super Coolers, HP pump, Hyd. Hose, PWM Valve, Mount
Platform, 1-1/4” Control Valve, 1-1/4” On/Off Valve and SS Flowmeter.
**Includes Super Coolers, HP pump, Hyd. Hose, PWM Valve, Mount
Platform, 1-1/4” Fast Valve and SS Flowmeter.
| Part | Description |
| AG428520 | AccuFlow HP Kit, Dual Cooler, Two Valve* |
| AG428521 | AccuFlow HP Kit, Dual Cooler, Fast Valve** |
| AG428295 | AccuFlow HP Kit, Control Node and Cable |
| AG428267 | Cable, HP Node |
| AG428268 | Cable, Chassis Challenger/Generic Systems |
| AG428272 | Cable, Implement Extension Tee - 1 Ft. |
| AG428269 | Cable, Implement Extension Tee - 12 Ft. |
| AG428270 | Cable, Implement Extension Tee - 24 Ft. |
| AG428271 | Cable, Cab Power/CAN SCS 4x00/5x00 Series |
| AG428273 | Cable, Tee Adapt SCS4400 to AccuFlow HP Node |
| AG428249 | Control Valve, 1-1/4” NPT NH3 |
| AG428250 | ON/OFF Valve, 1-1/4” NPT NH3 |
| AG428251 | Fast Valve, 1-1/4” NPT, NH3 |
Controllers
47