2013 AGCO Application Parts & Accessories Catalog - AGCO Parts

Pumps
PTO Belt Driven Pumps
Cast iron 1-1/4" x 1" straight centrifugal pumps
with pulleys and 10-groove belt arranged for
PTO drive. Frame mount model designed for use
with tumblerod drive shaft. A Viton mechanical
seal is standard and is compatible with most
chemicals. Data is based on 1 ft lift through
unrestricted suction hose and fittings with full
1-1/4" I.D.
Note: See page 216 for parts breakdown.
Performance:
• 20PSI - 57 GPM
• 40 PSI - 48 GPM
• 50 PSI - 37 GPM
| Part | Description |
| AG513758 | Pump, 540 RPM, 6 Spline, 1-3/8" |
| AG000144 | Pump, 540 RPM, 6 Spline, 1-3/8" Quick Coupler |
| AG513253 | Pump, 540 RPM, 1" Stub Shaft |
| AG005577 | Pump, 1000 RPM, 20 Spline, 1-3/4" |
| AG000149 | Pump, 1000 RPM, 21 Spline, 1-3/8" |
| AG000126 | Repair Kit, 540 RPM Pumps |
| AG000127 | Repair Kit, 1000 RPM Pumps |
High Performance PTO
Belt Driven Pumps
The 150 Series pumps are designed
with an increased pulley ratio and
larger inlet and discharge port
(1-1/2" x 1-1/4"). This provides higher
pressure and greater volume for
applications with large spray tanks
and long spray booms. The
increased performance allows the
operator to save fuel by running at
lower engine speeds and still maintain
adequate spraying pressure.
Standard pumps have Viton seal
and Valox impeller-cast iron impeller
pumps are also available.
Note: To avoid possible problems, make certain that all sprayer components
are capable of handling the increased performance characteristics
of the 150 Series Pump. 1-1/2" Suction, 1-1/4" Discharge.
See page 215 for parts breakdown.
Pressure (psi)
Pressure (psi)
120
100
80
60
40
20
PTOC-150-600
Flow (lpm)
0 50 100 150 200 250 300 350
600 RPM
540 RPM
500 RPM
450 RPM
0
0
0 20 40 60 80 100
Flow (gpm)
120
100
80
60
40
20
PTOC-150-1000
Flow (lpm)
0 50 100 150 200 250 300 350
1000 RPM
900 RPM
800 RPM
700 RPM
0
0
0 20 40 60 80 100
Flow (gpm)
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
Pressure (bar)
Pressure (bar)
| Part | Description |
| AG051605 | Pump, 540 RPM, 6 Spline, 1-3/8" PTO |
| AG051291 | Pump, 540 RPM, 6 Spline QC, 1-3/8" PTO |
| AG051606 | Pump, 540 RPM, 1" Stub Shaft |
| AG051607 | Pump, 1000 RPM, 21 Spline, 1-3/8" PTO |
| AG051608 | Pump, 1000 RPM, 20 Spline, 1-3/4" PTO |
| AG051609 | Pump, 1000 RPM, 1" Stub Shaft |
70