2013 AGCO Application Parts & Accessories Catalog - AGCO Parts

Scot Chemical Transfer Pump
The model LFE 213 has 1-1/4" inlet and 1"
outlet powered by a 3/4-h.p., totally-enclosed
115/230-volt single-phase hi-speed motor
(3450 RPM). Pump features all-iron construction,
Viton seal and stainless steel shaft. Motor
is double ball bearing design with type 56J
motor frame. Motor totally enclosed for outdoor, dusty or dirty locations.
May be used for:
• Blending • Mixing • Seed Treating • Liquid Transfer
Notes: Maximum 40 GPM at open discharge. See the Technical Pages
for more information on repairs.
| Part | Description |
| AG707160 | Pump with 3/4-HP Motor |
| AG706319 | Replacement Seal |
Scot PSE303 PressurSeal ® Pumps
These all-iron pumps have hardened impellers,
double-sealed bearings, a double mechanical
viton seal, stainless steel hardware fasteners,
and the pressure chamber which allows the
pump to be run dry without damage. 3 Phase -
3500RPM TEFC Motor.
Performance:
• 10-1/2 Lb. material - 1.356 S.G.
• 711497 - 350 GPM@20PS
• 711496 - 250GPM@20PSI
• 711498 - 350GPM@20PSI
• 711496 - 300GPM@20PSI
• 14 Lb. Material - 1.7 S.G.
• 711497 - 300GPM@20PSI
Pumps
Scot Self-Priming Pedestal Pump
To operate, prime only once by removing
plug-in top of pump head and fill priming
chamber with liquid. A built-in check valve
holds the initial prime for instant pumping
from sump installations and prohibits back
siphoning into the pump when stopped. A
foot valve is not required.
• All-Iron Construction
• Cast Iron Bearing Frame
• Stainless Steel Shaft Sleeve • Viton Seal
• Double Sealed Ball Bearings
Note: See the Technical Pages for more information on repairs.
Shaft
HP Req'd.
at 3450 RPM
PSI at Various GPM with
1.0 SG Liquid at 3450 RPM
Size Dia. 1.0 SG 1.4 SG 50 100 200 300 350 Part No. Price
2" 5/8" 2 3 30 20 — — — 704549D $ 382.28
3" 7/8" 7-1/2 10 50 48 40 30 15 704612D 1,084.52
| Part | Description |
| AG704549 | 2" Pump |
| Part | Description |
| AG711496 | Pump 3 x 3" NPT - 7.5 HP Electric 3 Phase |
| AG711498 | Pump 3 x 3" NPT - 15 HP Electric 3 Phase |
Scot PSP303 PressurSeal Pumps
Pump Bases
For mounting pumps and motors.
(Not drilled.)
| Part | Description |
| AG312299 | Base, 7 Gauge, 16" x 26" |
Flex Couplings
Flex couplers are used to connect pump
shaft to motor shaft. The rubber insert
provides enough flex to compensate for
slight misalignment and serves to
absorb vibration.
| Part | Description |
| AG000602 | Spider Insert |
| AG000608 | Coupler Half 1/2" |
| AG000607 | Coupler Half 5/8" |
| AG000606 | Coupler Half 3/4" |
| AG000605 | Coupler Half 7/8" |
| AG008731 | Coupler Half 15/16" |
| AG000603 | Coupler Half 1" |
| AG000604 | Coupler Half 1-1/8" |
| AG000597 | Coupler Half 1-3/8" |
| Part | Description |
| AG708455 | 3" NPT Pump |
84