2013 AGCO Application Parts & Accessories Catalog - AGCO Parts

Foam Tank Cleaner
Ag-Chem foam tank cleaner helps to maintain the
performance of marking systems by removing
residue buildup. Residue buildup can be the
source of why a marking system will not produce
a good quality foam. One quart treats 40-60 gallon
tank. 4 gallons per case.
| Part | Description |
| AG055162 | 1 Gallon |
Foam Marker Boomless
This foam marker is built for boomless
sprayers and spreaders.
Features:
• 4 Gallon Tank
• 52 ft of tubing
• Remote switch control
• 1 Foam nozzle
| Part | Description |
| AG726764 | Foam Marker TJ Boomless |
Foam Marker 1 Gallon
The TJ 1G foam marker is economically
built for ATV sprayers
and for drop spreaders. The
marker generates small foam
balls at the end of the boom (or
on each side of the spreader). A
full tank will last approximately
1.5 to 3 hours depending on the
flow rate and the quantity of foam agent used. Easy and fast to install.
Foam marker is field tested.
Features:
• 1 gallon tank
• Built-in compressor
• 2 foam nozzles
• Right/Left remote switch
• 2 x 10 feet of air/liquid tubing
• 6.5 ft.of power supply cable
• 10 ft. of cable for remote switch box
• Flow regulator
Foam Marker 6.4 Gallon
The TJ EV24 is an economical foam
marker system built for small & medium
sprayers. It features a 6.4 gallon
tank with an integrated sealed compressor
and valve assembly. The unit
comes standard with 15 feet of compressor
to switch box cable, and
enough air and liquid tubing to mount
the unit on booms up to 60 feet in
length.
Features:
• 12 VDC Diaphragm compressor
• Working pressure 10.1 PSI
• Consumption range is from 2 GPH to 3 GPH
• Output up to 30 balls per minute
• Sealed compressor and valve assembly
• 82 feet of air-liquid tubing
Note: See Technical Pages for parts breakdown.
| Part | Description |
| AG726218 | Foam Marker 6.4 Gallon |
| AG725939 | Switch Box Extension Cable 15 feet |
Foam Marker 15 Gallon
The TJ-15GX foam marker system
features a 15 gallon poly tank with an
intragrated sealed compressor and
valve assembly. The unit comes
standard with 15 feet of compressor
to switch box cable, and enough air
and liquid tubing to mount the unit on
booms up to 120 feet in length.
Features:
• 12 VDC Diaphragm compressor
• Working Pressure 10.1 PSI
• Consumption range is from 2 GPH to 3 GPH
• Bottom drain plug
• Sealed compressor and valve assembly
• Optional hose drop assembly
Note: See Technical Pages for parts breakdown.
| Part | Description |
| AG725940 | Foam Marker TJ-15GX |
| AG725938 | Foam Extension Drop |
| AG725939 | Switch Box Extension Cable 15 feet |
Foam Products
| Part | Description |
| AG060903 | Foam Marker 1 Gallon |
5