2013 AGCO Application Parts & Accessories Catalog - AGCO Parts

Scot Sprayer Pumps
Scot sprayer pumps are all iron construction
for rugged performance. They have Viton seals
and stainless steel shaft sleeves. They are
available with several engine configurations
including the new Industrial Plus (IP) unit from
Briggs and Stratton shown here. It has most all
the high-quality features found on the more
expensive engines but is more economical!
Repair Parts for Scot 2" Pump
| Part | Description |
| AG709043 | 1-1/2" x 1-1/4" Pump, 5.5-HP Honda |
| AG712512 | 2" x 2" Pump, 8-HP Honda Electric Start |
| AG715592 | Pump Only 2" x 2" |
Scot Sprayer Pump Repair Kit
Includes Viton Seal, shaft seal.
| Part | Description |
| AG704641 | Repair Kit For 5-HP Pumps |
| AG709165 | Repair Kit For 8-HP Pumps |
| Ref | Part | Description |
| 1 | AG513745 | Seal, Viton, 2" and 3" - 8 and 10HP |
| 2 | AG703289 | Drain Plug |
| 3 | AG703272 | Shaft Sleeve, 2" and 3", 8 and 10 HP |
| 5 | AG602787 | O-Ring Casing - EPDM |
| 7 | AG704632 | Casing |
| 8 | AG703270 | Flinger, 8 and 10 HP |
| 9 | AG708943 | Impeller |
Repair Parts for Scot 1-1/2" x 1-1/4" Pump
| Ref | Part | Description |
| 1 | AG704568 | Seal, Buna, 2" - 3 and 5 HP |
| 1 | AG704569 | Seal, Viton, 2" - 3 and 5 HP |
| 2 | AG703289 | Drain Plug |
| 3 | AG704630 | Shaft Sleeve |
| 5 | AG602787 | O-Ring Casing - EPDM |
| 7 | AG704633 | Case |
| 9 | AG704638 | Impeller |
Scot 2" Self-Priming Pump
Heres a pump and motor combination
that is recommended for general
purpose use. All-iron construction
and Viton fitted. Motor is 2-h.p. 3450
RPM TEFC.
Note: See the Technical Pages for
more information on repairs.
| Part | Description |
| AG711505 | 2" Pump, 1 Phase, 115/230 Volt |
| AG711506 | 2" Pump, 3 Phase, 230/460 Volt |
Scot Straight Centrifugal Pedestal Pumps
Scot straight centrifugal pedestal-mount
pumps offer the versatility to meet a wide
variety of applications. May be driven by
belt and pulley or direct-coupled using
flex couplers. All-iron construction, Viton
seal, and stainless steel shaft sleeve are
just some of the features found on this
high-quality pump.
• All-Iron Construction
• Cast Iron Housing
• Double Sealed Ball Bearings
• Hardened Iron Impeller
• Stainless Steel Shaft Sleeve
• Mechanical Seal
Note: See the Technical Pages for more information on repairs.
Shaft
HP Req'd.
at 3450 RPM
PSI at Various GPM with
1.0 SG Liquid at 3450 RPM
Size Dia. 1.0 SG 1.4 SG 50 100 200 300 350 Part No. Price
2" 7/8" 7-1/2 10 55 50 30 — — 704614D $612.56
3" 7/8" 10 15 55 54 49 38 20 704615D 702.24
Pumps
| Part | Description |
| AG704614 | 2" Pump |
| AG704615 | 3" Pump |
83