2013 AGCO Application Parts & Accessories Catalog - AGCO Parts

Valve Flanges
Model 12690 Throttling Valve
For regulating flow in systems equipped with centrifugal
pumps where sensitive regulation is required or to control
flow in agitation lines.
| Part | Description |
| AG054469 | 2" Poly Flange |
| AG054456 | 3" Poly Flange |
| AG518365 | 1" Cast Iron Flange |
| AG554774 | 2" Cast Iron Flange |
| AG553026 | 3" Cast Iron Flange |
| AG553034 | 4" Cast Iron Flange |
| AG562963 | 5" Cast Iron Flange |
| AG561265 | 6" Cast Iron Flange |
| AG710540 | 3" 304 S.S. Flange |
| AG710541 | 4" 304 S.S. Flange |
| AG552046 | Flange Mounting Bolt |
| AG550477 | Nut |
| AG550450 | Lockwasher |
Flange Gaskets
Non-asbestos, DurLon ® .
| Part | Description |
| AG056121 | 1-1/2" Gasket |
| AG517098 | Flange Gasket 2" |
| AG517044 | Flange Gasket 3" |
| AG056123 | 4" Gasket |
| AG517045 | 5" Gasket |
| AG513870 | GASKET FULL FACE NON ASB |
TeeValve ® Control Valve
For selective control of three-section boom
sprayers at pressures up to 300 PSI:
• Use to open any of three-boom section lines in
any desired combination
• Raise lever to open, lower lever to close the valve without changing
the indexed position
• Aluminum construction with stainless steel and plastic internal parts for
maximum corrosion resistance
Note: Model No. 17Y: Inlet size - 1", Outlet size - 3/4", Bypass size - 3/4",
Gunlet size -3/4".
| Part | Description |
| AG006268 | TeeValve, 17Y |
| AG001549 | TeeValve Repair Kit |
| Part | Description |
| AG001948 | Valve Throttling 3/4" Ports |
Throttling Valve
Valve is designed for use in the bypass line of the 144-
1-3 boom solenoid valve. When installed in the bypassto-tank
line, it may be adjusted to create a pressure
drop equal to the line pressure of that particular boom
section. Then when the operator turns the boom section
on or off, the pressure in the remaining boom section
will not be affected.
| Part | Description |
| AG009925 | 1/2" Throttling Valve |
| AG051222 | 3/4" Throttling Valve |
Pressure Regulator
All nylon/stainless steel pressure regulator handles
pressures up to 150 PSI. Pressure adjustments are
made without tools. 3/4" or 1/2 ports with 1/4" (F) NPT
gauge opening.
| Part | Description |
| AG050436 | 1/2" Regulator |
| AG009860 | 3/4" Regulator |
Model 110 Relief Valves
The 110 piston-type regulating valves are available in
sizes 1/4", 3/8", 1", 1-1/4" or 1-1/2" in choice of ductile
iron, brass, or aluminum. Removable bonnet for servicing
unit without removing valve from line.
Valves
| Part | Description |
| AG053476 | 1/4" Brass (Up to 50 PSI) |
| AG843365 | 1/4" Brass (50 - 300 PSI) |
| AG052547 | 1/4" Brass (300 - 700 PSI) |
| AG001583 | 3/8" Brass (Up to 300 PSI) |
| AG001584 | 3/8" Brass (300 - 700 PSI) |
| AG051948 | 1" Aluminum (Up to 150 PSI) |
| AG006770 | 1" Ductile Iron (Up to 150 PSI) |
| AG055972 | 1-1/4" Brass (Up to 150 PSI) |
| AG051624 | 1-1/4" Aluminum (Up to 150 PSI) |
| AG050041 | 1-1/4" Ductile Iron (Up to 150 PSI) |
| AG059817 | 1-1/2" Aluminum (Up to 150 PSI) |
| AG513831 | 1-1/2" Ductile Iron (Up to 150 PSI) |
63