2013 AGCO Application Parts & Accessories Catalog - AGCO Parts

Nozzle Accessories
Split-Eyelet Nozzle
Mounting spray nozzles are fast and simple with
Split-Eyelets. Just drill 9/32" hole in boom pipe
where nozzle is to be located, insert split-eyelet
inlet into hole and tighten screws. Use with tips up
to 5 GPM capacity. Clamps are zinc-plated steel.
Notes: For pressures up to 250 PSI. For 1/2" pipe, 13/16" O.D. tubing,
7/8" O.D. tubing.
| Part | Description |
| AG001804 | Nylon Body |
| AG050842 | Brass Body |
For 3/4" Pipe, 1" O.D. Tubing,
1-1/16" O.D. Tubing
| Part | Description |
| AG001805 | Brass Body |
| AG001807 | Nylon Body |
For 1" Pipe, 1-1/4" O.D. Tubing,
1-3/8" O.D. Tubing
| Part | Description |
| AG005880 | Brass Body |
High-Volume Agitator
Glass-filled polypropylene venturi-style agitator
has snap-in interchangeable orifices.
Output flow can be up to 5.5 times that of
the inlet flow. Agitator must be fed by a
separate line and not on the end of a relief
valve or bypass line. Inlet is 3/4" (M) NPT.
Nozzle Cleaning Brush
7" long with long bristles on one end
and shorter on the other. Handy for
cleaning plugged nozzles without damaging
the orifice.
| Part | Description |
| AG007408 | Nozzle Cleaning Brush |
Water and Oil Sensitive Paper
These specially coated papers are
used for evaluating spray distributions,
swath widths, droplet densities,
and penetration of spray. Water
sensitive paper is yellow and is
stained blue by exposure to aqueous
spray droplets. White oil sensitive
paper tuns black in areas
exposed to oil droplets.
| Part | Description |
| AG050397 | Water Sensitive Paper 3" X 1" - 50 cards |
| AG050398 | Water Sensitive Paper 3" X 2" - 50 cards |
| AG050399 | Water Sensitive Paper 20" X 1" - 25 strips |
| AG054588 | Oil Sensitive Paper 3" X 2" - 50 cards |
Jet Agitators
Jet agitator is installed at bottom of spray
tank on end of agitator return line. Continuous
solid stream Jet Flow creates turbulence,
keeps wettable powders in suspension.
| Part | Description |
| AG056240 | Venturi-Style Agitator |
Calibration Container
10 to 60 ounces, .30 to 1.80 liters.
| Part | Description |
| AG009119 | Jet Agitator, Brass, for Max 50 Gal |
| AG009120 | Jet Agitator, Brass, for Max 110 Gal |
| AG009121 | Jet Agitator, Brass, for Max 140 Gal |
| AG009122 | Jet Agitator, Brass, for Max 250 Gal |
196
| Part | Description |
| AG426502 | 68 oz. (2.0 L) Calibration Container |
| AG050313 | 5-Gallon Calibration Container |