TORFP GJKZ 09-0063 <str<strong>on</strong>g>SOW</str<strong>on</strong>g> <str<strong>on</strong>g>Attachment</str<strong>on</strong>g> DAppendix D Existing <str<strong>on</strong>g>Epoxy</str<strong>on</strong>g> <str<strong>on</strong>g>Coating</str<strong>on</strong>g> <str<strong>on</strong>g>System</str<strong>on</strong>g> DataEco-MPEMULTI-PURPOSE EPOXYHigh-performance soluti<strong>on</strong>• EASY TO USE – Self-leveling formula allows easy applicati<strong>on</strong>• PROVIDES A HIGH-QUALITY LOOK – High-gloss finish improvesthe appearance over c<strong>on</strong>crete-based fillers• LOW ODOR – Perfect for odor-sensitive stock and envir<strong>on</strong>ments• MULTI-PURPOSE – Primer and build coatPart of theFamily:Low Odor No noxious fumes; will not c<strong>on</strong>taminate odor-sensitive inventory.Envir<strong>on</strong>mentally Friendly Reduced solvent means less evaporati<strong>on</strong> and less waste.User Friendly Can be applied during normal business hours—no shutdown required.VOC Compliant Meets the Envir<strong>on</strong>mental Protecti<strong>on</strong> Agency VOC regulati<strong>on</strong>s.TENNANT COATINGSFor First Impressi<strong>on</strong>s That Last36 of 57
<str<strong>on</strong>g>Epoxy</str<strong>on</strong>g> Cure TimesEco-MPETORFP GJKZ 09-0063 <str<strong>on</strong>g>SOW</str<strong>on</strong>g> <str<strong>on</strong>g>Attachment</str<strong>on</strong>g> DAppendix D Existing <str<strong>on</strong>g>Epoxy</str<strong>on</strong>g> <str<strong>on</strong>g>Coating</str<strong>on</strong>g> <str<strong>on</strong>g>System</str<strong>on</strong>g> DataHOURSECO-MPESTANDARD EPOXIESAPPEARANCE:COLOR:TRACTION:High-gloss finish with smooth textureClear, plus standard and custom colorsIncrease slip resistance with Tennant’s line of grit additivesVOC COMPLIANCE: Eco-MPE: Very low VOC; 4 g/LCURE TIME:APPLICATIONS:INSTALLATION:Eco-MPE: 18 hours under normal c<strong>on</strong>diti<strong>on</strong>sEco-MPE: Multi-purpose primer and build coatEco-MPE: Professi<strong>on</strong>al applicati<strong>on</strong> suggested;special equipment requiredStandard Colors – These colors are close approximati<strong>on</strong>s; please c<strong>on</strong>tact Tennant for product samples. Custom colors are also available. See product bulletin for any restricti<strong>on</strong>s <strong>on</strong> colorant use.WHITE BLACK LIGHT GRAY CANADAGRAYMEDIUM BATTLESHIP SANDY BEIGE YELLOWGRAYGRAYTILE RED ROTUNDA IVY GREEN SMOKE BLUE REGAL BLUEREDChemical Resistance PropertiesAcids, Inorganic 10% Hydrochloric Acid E E(Muriatic) 30% Hydrochloric Acid E G10% Nitric Acid E G50% Phosphoric Acid F F37% Sulfuric Acid GG(Battery Acid)Acids, Organic 10% Acetic Acid G F10% Citric Acid GGOleic AcidG FAlkalies 10% Amm<strong>on</strong>ium Hydroxide E E50% Sodium Hydroxide E ESolvents Ethylene Glycol (Antifreeze) E G(Alcohols) Isopropyl Alcohol F PMethanolF FSolvents d-Lim<strong>on</strong>ene GG(Aliphatic) Jet Fuel (JP-4) E EGasolineGGMineral SpiritsE ESolvents (Aromatic) Xylene F FSolvents(Chlorinated) Methylene Chloride P PSolvents Methyl Ethyl Ket<strong>on</strong>e (MEK) P P(Ket<strong>on</strong>es & Esters) Propylene Glycol Methyl F FEther Acetate (PMA)Miscellaneous 20% Amm<strong>on</strong>ium Nitrate E EChemicals Brake Fluid F FBleachE EMotor Oil (SAE30)E ESkydrol® 500BF FSkydrol® LD4F F20% Sodium Chloride E E1% Tide® Laundry Soap E E10% Trisodium Phosphate E EBased <strong>on</strong> 1-day and 7-day spot testing <strong>on</strong> c<strong>on</strong>crete.<str<strong>on</strong>g>Coating</str<strong>on</strong>g> cured 2 weeks prior to testing.Skydrol® is a registered trademark of M<strong>on</strong>santo. Tide® is a registered trademark of Proctor and Gamble.E = Excellent (No Adverse Effect)G = Good (Limited Adverse Effect or Staining)1-7 dayF = Fair (Moderate Adverse Effect)P = Poor (Unsatisfactory)Physical/Performance PropertiesMATERIAL PROPERTIES (LIQUID) ECO-MPEProperty Test Method ResultsFlash Point, °F (°C) ASTM D3278 Part A: >200 (93)Seta Closed Cup Part B: >200 (93)Percent Solids, by weight ASTM D2369 Part A: 99.4Part B: 99.8Density, lb/gal (kg/L) ASTM D1475 Part A: 9.22 (1.11)Part B: 8.39 (1.00)Mixed: 8.94 (1.07)Shelf Life2 yearsViscosity, cps ASTM D2196 Part A: 700-1000Brookfield Part B: 350-550Mixed: 500-700Volatile Organic Compound ASTM D3960 Mixed: A+B(VOC) lb/gal (g/L) 0.04 (5)CURED COATING PROPERTIES (DRY FILM) Eco-MPEProperty Test Method ResultsAbrasi<strong>on</strong> Resistance, mg loss ASTM D4060* 83.1Taber AbraserCoefficient of Fricti<strong>on</strong> (COF)** ASTM D2047 0.59–0.62James Fricti<strong>on</strong> TesterCompressive Strength, psi (kPa) ASTM D695 13,500 (93,150)Tensile Strength, psi (kPa) ASTM D2370 8,000 (55,200)Percent El<strong>on</strong>gati<strong>on</strong> ASTM D2370 5Shore D Hardness ASTM D2240 80-85 @ 0 sec75-80 @ 15 secUV/Light StabilityAPPLICATION CHARACTERISTICSPropertyWill yellow or amber over timeResultsCoverage Rate, ft 2 /gal 53-535Applicati<strong>on</strong> Thickness, wet mils 3-30*CS-17 Taber Abrasi<strong>on</strong> Wheel, 1,000 gram load, 1,000 revoluti<strong>on</strong>s.**To improve tracti<strong>on</strong> in slip hazard areas, use Tennant 292 Grit.See 292 Grit Product Bulletin for more informati<strong>on</strong>.Results are based <strong>on</strong> c<strong>on</strong>diti<strong>on</strong>s at 77°F, 50% relative humidity.Tennant701 North Lilac DriveMinneapolis, MN 55422 USAtel: +1-763-540-1315fax:+1-763-513-2144www.tennantco.comemail: info@tennantco.comA system of high-performing Tennant coatings, sweepers, andscrubbers will maximize your floor's natural life, minimize yourmaintenance costs and create a world-class impressi<strong>on</strong>.37 of 571250-99 Eco-MPE 12/08©2008 The Tennant Company logo and other marks designated with the symbol "®" are registeredtrademarks of Tennant Company, Inc., in the United States and/or other countries. The marks designatedwith "TM" are trademarks of Tennant Company that are not yet registered in the United States.
Change language