SOW Attachment D Epoxy Coating System Used on Hangar Floor

Eco-RCE, RCE/F, RCE/M SnapshotTORFP GJKZ 09-0063 <strong>SOW</strong> <strong>Attachment</strong> DAppendix D Existing <strong>Epoxy</strong> <strong>Coating</strong> <strong>System</strong> DataCOLOR:VOC COMPLIANCE:WALK-ON TIME:APPLICATIONS:INSTALLATION:RCE, RCE/F, RCE/M – clear, Tennant 100 SeriesColorants, or full broadcast decorative flake orquartz into membrane.< 2 g/L.RCE, RCE/F: 4 hours under normal circumstances.RCE/M: 5 hours under normal circumstances.Multi-purpose primer and build coat.Professional application recommended; specialequipment required. RCE, RCE/F arecontractor-only product offerings.Physical/Performance PropertiesMATERIAL PROPERTIES (LIQUID)RCE, RCE/FRCE/MProperty Test Method Results ResultsFlash Point, °F (°C) ASTM D3278 Part A: >200 (93) Part A: >200 (93)Seta Closed Cup Part B: >200 (93) Part B: >200 (93)Percent Solids, by weight ASTM D2369 Part A: 99.9 Part A: 99.9Part B: 99.9 Part B: 99.8Density, lb/gal (kg/L) ASTM D1475 A/B (RCE): 9.04 (1.09) A/B: 9.10 (1.09)A/B (RCE/F): 9.06 (1.09)Viscosity, cps ASTM D2196 Part A: 250-650 Part A: 700-1000Brookfield Part B: 100-450 Part B: 350-550A/B: 250-450 A/B: 500-700Volatile Organic Compound ASTM D3960 Mixed A+B: 0.01 (0.82) Mixed A+B: 0.01 (1.15)(VOC) lb/gal (g/L)CURED COATING PROPERTIES (DRY FILM)RCE, RCE/FRCE/MProperty Test Method Results ResultsAbrasion Resistance, mg loss ASTM D4060* NA 83.1*Taber AbraserCompressive Strength, psi (kPa) ASTM D695 NA 13,500 (93,150)Tensile Strength, psi (kPa) ASTM D2370 5,200 (35,880) 7,000 (48,300)Percent Elongation ASTM D2370 4 5Coefficient of Friction (COF)** ASTM D2047 NA 0.5**Shore D Hardness ASTM D2240 80-85 @ 0 sec 80-85 @ 0 sec75-80 @ 15 sec 75-80 @ 15 secAPPLICATION CHARACTERISTICSRCE, RCE/FRCE/MProperty Test Method Results ResultsCoverage Rate Range, ft 2 /gal 80-535 53-535Application Thickness, wet/dry mils 3-30 3-30*CS-17 Taber Abrasion Wheel, 1,000 gram load, 1,000 revolutions.**After cleaning floor with auto scrubber.Results are based on conditions at 77°F, 50% relative humidity.TennantP.O. Box 1452Minneapolis,MN U.S.A.55440800-553-8033In Quebec call: 514.335.6061Fax: 763.540.1437www.tennantco.cominfo@tennantco.comA system of high-performing Tennant coatings, sweepers, and scrubberswill maximize your floor's natural life, minimize your maintenancecosts and create a world-class impression.41 of 571250-63 Eco-RCE, RCE/F, RCE/M 7/08©2008 Tennant and Nobles are registered trademarks of Tennant Company, whoseproducts are sold and serviced through Tennant Sales & Service Company.