z/OS V1R6.0 DFSMS Access Method Services for Catalogs

LISTCAT OutputVOLFLAG—Indicates if the volume is a candidate volume and if the volume is aprime or overflow volume on which data in a given key range is stored.CANDIDATE—The volume is a candidate for storing the data or indexcomponent.CAND-SPACE—The volume is a candidate for storing the data or indexcomponent, and it has a primary extent preallocated (the data set was definedwith a guaranteed-space storage class).OVERFLOW—The volume is an overflow volume on which data records in akey range are stored. The KEYRANGE begins on another (PRIME) volume.PRIME—The volume is the first volume on which data records in a key rangeare stored.VOLSER—The serial number of the volume.Device Type Translate TableThe following table lists the LISTCAT codes for supported device types.Table 13. Device Type Translate TableGeneric Name LISTCAT Code Device Type3380 3010 200E 3380, all models3390 3010 200F 3390, all models9345 3010 2004 9345, all models3400-2 30C0 8003 3420 Models 3, 5, and 73400-5 3200 8003 3420 Models 4, 6, and 8 (9 track, 6250 BPI)3400-6 3210 8003 3420 Models 4, 6, and 8 (9 track, 1600/6250 BPI)3400-9 3300 8003 3420C (3480 coexistence mode)3400-3 3400 8003 3430, 9 track, 1600/6250 BPI tape3480 7800 8080 3480 Magnetic Tape Unit3480 7800 8080 3490 Magnetic Tape Subsystem Models A01, A02,B02, B04, D31, and D323480X 7804 8080 3480 Magnetic Tape Unit with IDRC enabled3480X 7804 8080 3490 Magnetic Tape Subsystem Models A01, A02,B02, B04, D31, and D32 with IDRC enabled3490 7804 8081 3490 Magnetic Tape Subsystem Enhanced CapabilityModels A10, A20, B20, B40, D41, and D423590-1 7804 8083 IBM 3590 High Performance Tape Subsystem ModelsA00, 3591 A01, A14, B11, B1A, C12Examples of LISTCAT Output ListingsThis section illustrates the kind of output you can get when you specify LISTCATparameters. It also describes the job control language you can specify and theoutput messages you get when the LISTCAT procedure runs successfully.Job Control Language (JCL) for LISTCAT JobsThe job control language (JCL) statements that can be used to list a catalog’sentries are://LISTCAT JOB ...//STEP1 EXEC PGM=IDCAMS//OUTDD DD DSN=LISTCAT.OUTPUT,UNIT=3480,376 z/OS V1R6.0 DFSMS Access Method Services for Catalogs