z/OS V1R6.0 DFSMS Access Method Services for Catalogs

LISTCAT OutputDATA ---------- USER.SPANNED.DATAHISTORYDATASET-OWNER-----(NULL) CREATION--------2003.323RELEASE----------------2 EXPIRATION------2007.365VOLUMESVOLSER------------1P0301 DEVTYPE------X’3010200E’VOLSER------------1P0302 DEVTYPE------X’3010200E’INDEX --------- USER.SPANNED.INDEXHISTORYDATASET-OWNER-----(NULL) CREATION--------2003.323RELEASE----------------2 EXPIRATION------2007.365VOLUMESVOLSER------------1P0301 DEVTYPE------X’3010200E’VOLSER-----------------* DEVTYPE------X’3010200E’VOLSER------------1P0301 DEVTYPE------X’3010200E’VOLSER------------1P0302 DEVTYPE------X’3010200E’THE NUMBER OF ENTRIES PROCESSED WAS:AIX -------------------1ALIAS -----------------0CLUSTER ---------------4DATA ------------------5GDG -------------------1INDEX -----------------4NONVSAM ---------------9PAGESPACE -------------0PATH ------------------2SPACE -----------------0USERCATALOG -----------0TOTAL ----------------26THE NUMBER OF PROTECTED ENTRIES SUPPRESSED WAS 0IDC0001I FUNCTION COMPLETED, HIGHEST CONDITION CODE WAS 0IDC0002I IDCAMS PROCESSING COMPLETE. MAXIMUM CONDITION CODE WAS 0Figure 12. Example of LISTCAT VOLUME Output (Part 5 of 5)LISTCAT ALL Output ListingWhen you specify the LISTCAT command and include the ALL parameter, all theinformation for each catalog entry is listed (see Figure 13 on page 386). Thisexample illustrates the LISTCAT output for each type of catalog entry. You can usethis type of listing to obtain all cataloged information (except password andsecurity information) about each entry that is listed. When you want to list anentry’s passwords, you must provide the catalog’s master password (which resultsin listing the passwords of each password-protected entry) or each entry’s masterpassword.Note: When ENTRIES is specified, you specify only those entrynames that identifycatalog entries which are not volume entries. If a volume serial number isspecified with the ENTRIES parameter, then entrynames of other entry typescannot also be specified. However, if the ENTRIES parameter is not specifiedand if entry types are not specified (that is, CLUSTER, SPACE, DATA, etc.),all entries in the catalog, including volume entries, are listed.Appendix B. Interpreting LISTCAT Output Listings 385