IQ plus® 800/810 - Rice Lake Weighing Systems

FORMAT MenuParameter Choices DescriptionUNITS unit ID Allows customization of default units identifiers for displayed and printed weights. Defaultvalues (LB=pound; KG=kilogram; OZ=ounce; TN=ton; GR=gram; G=grain) can bemodified using the procedure described for the P FORMT menu. Customized identifiersare listed in the UNITS subparameter values for primary, secondary, and ROCparameters.SPNAME SPNAME0 –SPNAME9Level 3 submenusPRIMARYSECNDRYRATECHGDATEFMTDATESEPTIMEFMTDSP DIVDEC PNTUNITSDSP DIVDEC PNTUNITSMULTDSP DIVDEC PNTMULTTIMEMMDDYYDDMMYYSLASHDASHSEMI12 HOUR24 HOURTIMESEP COLONCOMMALevel 4 submenusPrimary UnitsDSP DIV 125DEC PNT 8888888888888.888888.888888.888888.888888.888888.88888888888008888880Allows specification of setpoint names. Use the procedure described under the P FORMTmenu to assign names for SPNAME0 through SPNAME9. Names specified on thisparameter are assigned to setpoints using the NAME parameter on the SETPNTS menu.Allows selection of display divisions, decimal point location, and units for the primaryunits.Allows selection of display divisions, decimal point location, units, and multiplier forsecondary units.Allows selection of display divisions, decimal point location, multiplier, and time for therate of change (ROC) function. See Section 9.2 on page 65 for more information aboutthe ROC function.Date format. Specifies the format in which the date is printed and displayed, either month/day/year, or day/month/year.Date separator. Specifies the separator character between the day, month, and yearwhen the date is printed. The display always uses a period (.) as the date separator.Time format. Specifies the format in which the time is displayed and printed, either in12-hour or 24-hour format. The actual setting of time is done through the front panelTIME/DATE key, and is always entered in 24-hour format.Time separator. Specifies the separator character between the minutes and hours whenthe time is printed. The display always uses a period (.) as the time separator.Display divisions. Selects the minimum division size for the primary units displayed weight.Decimal point location. Specifies the location of the decimal point or dummy zeroes in theprimary unit display. Value should be consistent with local legal requirements.Table 3-4. Format Menu Parameters (Continued)Configuration 21