vacon 100 installation manual - VEM motors Finland Oy

vacon • 13Receipt of delivery2.3.6 Size MR9Item Quantity PurposeM4x16 screw 3 Screws for control cable clampsControl cable grounding lamella 3 Control cable groundingCable lugs KP40 5 Clamping power cablesCable insulator 10 Avoiding contact between cablesCable grommet, hole diameter 25.3 mm 4 Control cable run-through sealingTable 9. Contents of accessories bag, MR92.4 ‘Product modified’ stickerIn the Accessories bag included in the delivery you will find a silver Product modified sticker.The purpose of the sticker is to notify the service personnel about the modifications made inthe AC drive. Attach the sticker on the side of the AC drive to avoid losing it. Should the AC drivebe later modified mark the change on the sticker.Product modifiedDate:Date:Date:Figure 3. ‘Product modified’ sticker2Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205