vacon 100 installation manual - VEM motors Finland Oy
vacon 100 installation manual - VEM motors Finland Oy
vacon 100 installation manual - VEM motors Finland Oy
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Commissioning <strong>vacon</strong> • 682Further remove the extension box cover, the touch shield and the I/O plate with I/O grommet plate. Locate the EMC jumper on the EMC board (see magnificationbelow) and remove it.Figure 62.CAUTION! Before connecting the AC drive to mains make sure that the EMC protectionclass settings of the drive are appropriately made.NOTE! After having performed the change write ‘EMC level modified’ on thesticker included in the Vacon <strong>100</strong> delivery (see below) and note the date. Unlessalready done, attach the sticker close to the name plate of the AC drive.Product modifiedEMC-level modified C1->C4Date:Date:Date:DDMMYY24-hour support +358 (0)201 212 575 • Email: <strong>vacon</strong>@<strong>vacon</strong>.com6
Change language