vacon 100 installation manual - VEM motors Finland Oy

Power cabling vacon • 44ConnectorCable lugCable lugFigure 40. Placing two cable lugs on top of each otherTightening torques of cable terminals:FrameTypeTightening torque[Nm]/[lb-in.]Power and motorterminalsTightening torque[Nm]/[lb-in.]EMC groundingclampsTightening torque,[Nm]/[lb-in.]Grounding terminalsMR8MR90140 2—0205 20140 4—0205 4 20/40*0261 2—0310 20261 4—0310 4[Nm] lb-in. [Nm] lb-in. [Nm] lb-in.177/354* 1.5 13.3 20 17720/40* 177/354* 1.5 13.3 20 177*. Cable clamping (e.g. Ouneva Pressure Terminal Connector)Table 22. Tightening torques of terminals11Expose the shield of all three cables in order to make a 360-degree connectionwith the cable clamp.Figure 41.24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com4