vacon 100 installation manual - VEM motors Finland Oy

More documents

Recommendations

Info

Power cabling vacon • 46M4x10Figure 43.15Check the connection of the earth cable to the motor and the AC drive terminalsmarked with .NOTE: Two protective conductors are required according to standard EN61800-5-1. See chapter Earthing and earth fault protection.Connect the protective conductor using a cable shoe and an M8 screw (includedin the Accessories bag) on either of the screw connectors as advised in Figure 44.Figure 44.24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com4
vacon • 47Power cabling4.4 Installation in corner-grounded networkCorner grounding is allowed for the drive types rating from 72 A to 310 A at 380…480 V supplyand from 75 A to 310 A at 208…240 V supply.In these circumstances the EMC protection class must be changed to level C4 following the instructionsin chapter 6.3 of this manual.Corner grounding is not allowed for the drive types with rating from 3.4 A to 61 A at 380…480 Vsupply and 3.7 A to 62 A with 208…240 V supply.4Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
Page 1 and 2: vacon 100ac drivesinstallation manu
Page 3 and 4: vacon • 16.3.3 Frame MR9.........
Page 5 and 6: vacon • 3EC DECLARATION OF CONFOR
Page 7 and 8: vacon • 5Safety1.2 WarningsVacon
Page 9 and 10: vacon • 7SafetyDo not perform any
Page 11 and 12: vacon • 9Receipt of delivery2.1 T
Page 13 and 14: vacon • 11Receipt of delivery2.3
Page 15: vacon • 13Receipt of delivery2.3.
Page 19: vacon • 17MountingFigure 9. Vacon
Page 22 and 23: Mounting vacon • 203.1.2.2 Flange
Page 24 and 25: Mounting vacon • 22Note that if s
Page 26 and 27: Power cabling vacon • 244. POWER
Page 28 and 29: Power cabling vacon • 264.1 UL st
Page 30 and 31: Power cabling vacon • 284.1.1.2 C
Page 32 and 33: Power cabling vacon • 304.1.1.4 C
Page 34 and 35: Power cabling vacon • 32Frame A1
Page 36 and 37: Power cabling vacon • 345• Inse
Page 38 and 39: Power cabling vacon • 367Connect
Page 40 and 41: Power cabling vacon • 384.3.2 Fra
Page 42 and 43: Power cabling vacon • 40M4 x 81 2
Page 44 and 45: Power cabling vacon • 427Cut the
Page 46 and 47: Power cabling vacon • 44Connector
Page 50 and 51: Control unit vacon • 485. CONTROL
Page 52 and 53: Control unit vacon • 505.1.2 Cont
Page 54 and 55: Control unit vacon • 525.1.2.1 Se
Page 56 and 57: Control unit vacon • 54max. 40 mm
Page 58 and 59: Control unit vacon • 56Strip abou
Page 60 and 61: Control unit vacon • 58Unless alr
Page 62 and 63: Control unit vacon • 605.4 Galvan
Page 64 and 65: Commissioning vacon • 626. COMMIS
Page 66 and 67: Commissioning vacon • 646.2.1 Cab
Page 68 and 69: Commissioning vacon • 666.3.2 Fra
Page 70 and 71: Commissioning vacon • 682Further
Page 72 and 73: Commissioning vacon • 7024-hour s
Page 74 and 75: Technical data vacon • 727.1.2 Ma
Page 76 and 77: Technical data vacon • 747.2 Vaco
Page 78 and 79: Technical data vacon • 767.2.1 Te
Page 80: Find your nearest Vacon officeon th

vacon 100 installation manual - VEM motors Finland Oy

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?