Kaspersky PURE User Guide - Kaspersky Lab

U S E R G U I D ETo select the detectable threat categories, please do the following:1. Open the main application window.2. In the top part of the window, click the Settings link.3. In the left part of the window, in the Protection Center section, select the Threats and Exclusions subsection.4. In the right part of the window, in the Threats section click the Settings button.5. In the Threats window that opens, check the boxes for the categories of threats that should be detected.ADVANCED DISINFECTION TECHNOLOGYToday's malicious programs can invade the lowest levels of an operating system which makes them practicallyimpossible to delete. If a malicious activity is detected within the system, Kaspersky PURE will offer you to perform aspecial advanced disinfection procedure which will allow to eliminate the threat and delete it from the computer.After this procedure, you will need to restart your computer. After restarting your computer, you are advised to run the fullvirus scan (see section "How to perform full scan of your computer for viruses" on page 62).For Kaspersky PURE to use the advanced disinfection procedure:1. Open the main application window.2. In the top part of the window, click the Settings link.3. In the left part of the window, in the General Settings section, select the Compatibility subsection.4. In the right part of the window, check the Enable advanced disinfection technology box.DISTRIBUTING COMPUTER RESOURCES WHEN SCANNING FORVIRUSESVirus scan tasks may be postponed to limit the load on the central processing unit (CPU) and disk storage subsystems.Executing scan tasks increases the load on the CPU and disk subsystems, thus slowing down other applications. Bydefault, if such a situation arises, Kaspersky PURE will pause virus scan tasks and release system resources for theuser's applications.However, there is a number of applications which will start immediately when CPU resources become available, and willrun in the background. For the scan not to depend on the performance of those applications, system resources shouldnot be conceded to them.Note that this setting can be configured individually for every scan task. In this case, the configuration for a specific taskhas a higher priority.In order to postpone the execution of scan tasks by Kaspersky PURE if it slows down other applications:1. Open the main application window.2. In the top part of the window, click the Settings link.3. In the left part of the window, in the General Settings section, select the Compatibility subsection.4. In the right part of the window, check the Concede resources to other applications box.214