Kaspersky PURE User Guide - Kaspersky Lab

U S E R G U I D EList of trusted web sites. For some websites to run correctly, you should add them to the list of trusted sites.At the same time, malicious objects can add to this list links to websites created by intruders.Note that some settings may lead to problems with displaying certain websites (for example if they use ActiveX controls).This problem can be solved by adding these websites to the trusted zone.Browser analysis and configuration are performed in the Browser Configuration Wizard. The Wizard checks if the latestbrowser updates are installed and makes sure that the current browser settings do not make the system vulnerable tomalicious exploits. Once the Wizard is complete, a report will be generated which can be sent to Kaspersky Lab foranalysis.The Wizard consists of a series of screens (steps) navigated using the Back and Next buttons. To close the Wizard onceit has completed its task, click the Finish button. To stop the Wizard at any stage, click the Cancel button.Close all Microsoft Internet Explorer windows before starting the diagnostics.To start the Browser Configuration Wizard:1. Open the main application window.2. In the bottom part of the window, click the Additional Tools button.3. In the window that opens, click the Tune Up your Browser Settings button.The Wizard steps in detail.Step 1. Starting the WizardMake sure the Microsoft Internet Explorer diagnostics option is selected and click Next to start the Wizard.Step 2. Microsoft Internet Explorer settings analysisThe Wizard analyzes Microsoft Internet Explorer browser settings. Searching the browser settings for problemsmay take some time. Once the search is complete, the Wizard will proceed automatically to the next step.Step 3. Selecting actions to configure the browserThe problems found during the previous step are presented in groups, based on the type of danger that theypose (see section "Additional Tools" on page 219).To view the actions within a group, click the + icon to the left of the group name.To make the Wizard perform a certain action, check the box to the left of the corresponding action description.By default, the Wizard performs all recommended and strongly recommended actions. If you do not wish toperform a certain action, uncheck the box next to it.It is strongly recommended not to uncheck the boxes selected by default because doing so will leave yourcomputer vulnerable to threats.Having defined the set of actions, which the Wizard will perform, click the Next button.224