Face grooving with URMA IntraMax and boring with ... - Horn USA, Inc.

More documents

Recommendations

Info

CARBIDE GRADESUNCOATED GRADESMG12 - a universal grade with good wear resistance. Used at low or medium cutting speedsfor machining steel, cast iron and non ferrous materialsCOATED GRADESTN35 - a very popular grade TiN coated used at low or medium cutting speeds. Alsorecommended for machining stainless steel or exotic alloyed materialsTI25 -a TiCN coated grade with high abrasion resistance. Recommended for machiningsteel and non ferrous materials at medium cutting speedsTF45 -a TiAlN coated grade. This coating has a very high temperature stability and highhardness and is only used for special applications.TH35 -new standard grade AlTiN - extreme temperature stability with high hardness andvery good coefficient of friction.NN50In the UNITED STATES call us toll free1 - 888 - 818 HORN
CUTTING DATANominal cutting speeds with HORN gradesFeed rate IPRSUPERMINI ®MINI.0004"-.0008" .0004"-.0012".0008"-.002" .00012"-.004".0008"-.002" .0004"-.003"ISOMaterialHardnessBrinellCutting speed *v cft/mMG12 TN35 TI25 TF45 TH35 CB10/50C < 0,4% 125Carbon steelC > 0,4% < 0,6 % 15046-361 46-590 46-590 46-590 46-590C > 0,4% < 0,6 % 200annealed 180low alloyed steelquenched 27553-295 53-492 53-492 53-590Pquenched 300high alloyed steelannealed 200quenched 32563-295 63-295 63-400unalloyed 180Cast steellow alloyed 22063-361 63-590 63-590 63-590high alloyed 225martensitic, ferritic 200 63-295 63-295 63-295Maustenitic 180 53-263 53-263Cast iron 180-260 53-295 53-492 53-492 53-492 53-492KSpheroidal graphitecast iron180-260 53-295 53-425 53-425 53-492 53-492Malleable cast iron 130-230 53-425 53-425 53-492 53-492NiFe 59-246 59-246 59-246SNiCo 59-131 59-131 59-131NAl-alloy 46-722 53-1970 53-1970 53-1970Copper and brass alloys 46-722 46-2300 46-2300 46-2300H hardened material > 54 HRC 65-455Nv cis depending on the tool diameter and therefore of the maximum numbers of revolutions of the machine.In the UNITED STATES call us toll free1 - 888 - 818 HORNN51
Page 1: Face grooving withURMA IntraMaxandb
Page 4 and 5: ADAPTORS System URMAAdaptor with Be
Page 6 and 7: SUMMARYAdaptor with Beta module 40/
Page 8 and 9: BORING SYSTEM URMATOOLHOLDER TypeB1
Page 10 and 11: BORING SYSTEM URMATOOLHOLDER TypeB1
Page 12 and 13: BORING and PROFILING ≥ Ø .039″
Page 20 and 21: BORING and PROFILINGINSERT Type105w
Page 22 and 23: SUMMARYAdaptor with Beta module 40/
Page 24 and 25: FACE GROOVINGIntermediate adaptors
Page 26 and 27: FACE GROOVING SYSTEM URMABALANCING
Page 28 and 29: FACE GROOVINGIntermediate adaptors
Page 30 and 31: FACE GROOVING SYSTEM URMACARTRIDGE
Page 32 and 33: FACE GROOVINGINSERT Type105from out
Page 38 and 39: FACE GROOVINGINSERT TypeA110from ou
Page 40 and 41: BALANCING CHARTFor Urma fine boring
Page 42 and 43: BALANCING CHART Boring ≥ 2.0 mmfo
Page 52: CHOICE OF CARBIDE GRADESSynthetic c

Face grooving with URMA IntraMax and boring with ... - Horn USA, Inc.

Create successful ePaper yourself

Delete template?

Save as template?