Ingres 9.2 Migration Guide - Actian

Appendix A: Upgrading from Ingres 6.4This section contains the following topics: How To Use This Appendix (see page 89) Considerations for Ingres 6.4 (see page 89) Unload/Reload Procedure for Upgrading from 6.4 (see page 94) How You Upgrade from Ingres 6.4 Using Unload/Reload (see page 96) Alternate Upgradeb Procedure (see page 106) How You Upgrade from Ingres 6.4 Using Upgradedb (Alternate) (see page 107) Corresponding Parameter Names (see page 114) How To Use This AppendixThis appendix describes special considerations when upgrading from Ingres6.4.Regardless of the upgrade method you are using, you should perform the tasksdescribed in Considerations for Ingres 6.4 (see page 89).If you are using the unload/reload method to upgrade from Ingres 6.4, followthe instructions in How You Upgrade from Ingres 6.4 Using Unload/Reload (seepage 96).If you are using the upgradedb method to upgrade from Ingres 6.4, you canfollow the procedure in the chapter “Upgrading Using Upgradedb.” If you havedifficulties with that procedure in your testing, you can use the processdescribed in Alternate Upgradeb Procedure (see page 106).This appendix also lists Ingres 6.4 parameters and their corresponding namesin newer releases.Considerations for Ingres 6.4There are additional considerations when loading Ingres 6.4 databases andapplications into the new development installation. These considerationsinclude application preparation and system preparation.Upgrading from Ingres 6.4 89