Installation and Operation Manual For Hunter Ceiling ... - Hunter Fan

®STEP 8 - ASSEMBLING FAN BLADESHunter fans use several styles of fanblade irons (brackets that hold theblade to the fan).1. Your fan may include blade grommets(see Parts List). If your fanhas grommets, insert them byhand into the holes as shown inFigure 8a.2. Attach each blade to blade ironusing three blade assembly screwsas shown in Figure 8b. Some fansGrommetfeature a decorative medallion aswell as a blade iron. Insert theassembly screws into the bladeiron, through the blade and intothe medallion, with the bladesandwiched between the bladeiron and medallion as shown inFigure 8c.If you used grommets, the bladesmay appear slightly loose afterscrews are tightened. This is normal.3. Remove the blade mountingscrews and rubber shippingbumpers from the motor.BladeIronFanBladeMedallionFigure 8a - Inserting Grommet intoFan BladeFigure 8b - Attaching Fan Blade toBlade IronFigure 8c - Attaching Fan Blade toBlade Iron using Decorative Medallion1841524-01 9-5-2001