Installation and Operation Manual For Hunter Ceiling ... - Hunter Fan

®If your fan has a lower switch housingas shown in Figure 9c and youARE NOT installing a light fixture, orif your fan has a lower switch housingas shown in Figure 9d or 9e,complete the following steps:1. Connect the upper plug connectorfrom the motor to the lowerplug connector in the lowerswitch housing assembly. See Figure9f.Note: Both plug connectors arepolarized and will only fit togetherone way. Make sure that bothconnectors are properly alignedbefore connecting them together.Incorrect connection could causeimproper operation and damageto the product.Lower PlugConnectorHousingAssemblyScrewFigure 9f - Plug Connection andLower Switch Housing InstallationUpperSwitchHousingUpper PlugConnectorLowerSwitchHousing2. Place the lower switch housingassembly over the upper switchhousing. Align the side screwholes in the upper and lowerswitch housings. Attach the lowerswitch housing to the upperswitch housing with three #6-32x 3/8" housing assembly screws.See Figure 9f.Note: If your fan does not includea light fixture, you may purchasean accessory light kit separately.See STEP 10 - INSTALLING LIGHTFIXTURE.2241524-01 9-5-2001