ig6000 service - Kipor Power Systems

(4)Install the air cleaner element in the air cleaner case, close cabinet door.! Attention !■Dirty air filter will affect the air into the carburetor, and reduce the engine work power. If the engineworks in dirty place, please replace the air filter often.■Don’t operate the generator without the filter element in place or serious engine damagemay result.3.5 Spark plug inspection and adjustment:(1)Remove the spark plug cap and remove the spark plug with plug sleeve(2)Remove carbon on the electrodes of spark plug with a wiey brush and check sealing washer fordamage.(3)Check the resistance value of spark plug and replace if the resistance value is not within thestated value.Resistance value of spark plug3~9KΩ(4)Measure the plug gap with a wire-type feeler gauge. If the gap is not compatible with the standard,adjust by bending the side electrode.Spark plug gapStandard spark plug.028-.034 in. (0.7~0.8 mm)WR7DC0.7-0.8(5)Install the plug and tighten securely after adjustment, the specified torque is 20~30 N.22