ChemDraw User's Manual - CambridgeSoft

AdministratorPaged Document SetupTo create a document with one or more page:1. From the File menu, choose DocumentSettings.The Document Settings dialog box appears.2. On the Layout tab, ensure Pages is selected.3. Specify the number of pages in the DocumentSize section.The size of the pages is determined by the PageSetup settings. For more information, see“Page Setup” on page 179.4. Type the Margin settings.The units of the margins are set in thePreferences dialog box. The paper size minusthe margins determines the drawing area.5. Create Headers and Footers as described in“Creating Headers and Footers” on page 178.6. Click OK.A document is created using your settings.Poster Documents SetupYou can create a poster by creating a single largedrawing area, which will be printed on as manyseparate pages as necessary. When you set thedocument size and how much each page overlaps,ChemDraw calculates the number of pages neededand the margin sizes. You can set registration marks,which mark the overlap setting on each page, to useas a guide when assembling the poster from theseparate pages.To create a poster document:1. From the File menu, choose DocumentSettings.2. On the Layout tab, click Poster.3. Type the Height, Width, and Page Overlap.The number of pages and the margindimensions are calculated.4. Select whether to Print Registration Marks.5. Create Headers and Footers as described in“Creating Headers and Footers” on page 178.6. Click OK.An example of a 19-inch by 14-inch poster,consisting of six 8.5-inch by 11-inch pieces of paperwith a 1-inch overlap is shown below.11"1"8.5"1"1"19" X 14" PosterCreating Headers andFootersYou create headers and footers in the DocumentSettings dialog box. In poster documents, only oneheader and footer appear for the entire document.178•Working With Page LayoutCambridgeSoftSetting up Pages