T Catalogue 2010 - Tridonic

U – LED modules, converters and systemsuchainNEWUchain P511-SRuchain SRProduct description• LED module chain for highlighting lines and edgesand for backlighting complex contours, letters andsymbols in signage applications• Edge injection of transparent or diffuse materials• Reel pack• LED module with plastic casing and strain relief to preventmechanical loads on electronic components and glob-top• Attached with M4 metal screw or premounteddouble-sided adhesive tape• High-power LED in chip-on-board technology (COB)• Integrated current source to stabilise luminous flux• Flexible chain, can be split between any module• Beam characteristic: 120°• Connection: Cable 200 mm, both sides• For uniform backlighting: minimum distance to cover 50 – 60 mmÊÊFor product data sheet go to www.tridonic.com,or available on requestTechnical dataAmbient temperature ta -25 ... +55 °Ctc point1 65 °CÈProduct matrix, page 20Standards, page 20Colour temperatures and tolerances, page 132Ordering dataColourWavelength rangeColourtemperatureTypeArticle number3 light points per moduleDaylight white – 6,500 K P511-SR DL 89600803Warm white – 3,000 K P511-SR WW 89600801Yellow white 570 nm – P511-SR YW 89600802Red 619 – 629 nm – P511-SR R 89600798Amber 584 – 594 nm – P511-SR A 89600799Orange 600 – 610 nm – P511-SR O 89600800Packaging: 18 Rolls/CartonSpecific technical dataType Modules per roll Typ. luminous flux per roll 2 Supply voltage DC 3 Output per roll2 Total length per roll3 light points per moduleP511-SR DL 5 x 30 5 x 525 lm 12 V 5 x 12.5 W 5 x 4,500 mmP511-SR WW 5 x 30 5 x 440 lm 12 V 5 x 12.5 W 5 x 4,500 mmP511-SR YW 5 x 30 5 x 540 lm 12 V 5 x 12.5 W 5 x 4,500 mmP511-SR R 5 x 30 5 x 375 lm 12 V 5 x 12.5 W 5 x 4,500 mmP511-SR A 5 x 30 5 x 378 lm 12 V 5 x 12.5 W 5 x 4,500 mmP511-SR O 5 x 30 5 x 470 lm 12 V 5 x 12.5 W 5 x 4,500 mm1 If the max. temperature limits are exceeded, the life of the module will be greatly reduced or the module may be damaged. For the precise position of the tc point see the above diagram.2 Tolerance range for optical and electrical data: ±15 %.3 Exceeding the max. operating voltage leads to an overload on the uchain. This may in turn result in a significant reduction in lifetime or even in destruction.Tolerance range for the supply voltage: 12 V: +2 V / -0 V.All values at ta = 25 °C.T Catalogue 2010www.tridonic.com 35