T Catalogue 2010 - Tridonic

U – LED modules, converters and systemsumoduleNEWUstrip P130-2ustrip, whiteProduct description• LED strip module for linear illumination, highlightingof lines and edges and for side injection• For safety lighting, general lighting, effect lighting and shelf lighting• Suitable for LED profile Z200-2 / 201-2 / Z204, Z22W-2• Edge injection of transparent or diffuse materials• With maximum possible beam angle for uniform illumination• Low-profile• Simple installation thanks to pre-fitted adhesive tape• High-power LED in chip-on-board technology (COB)• Dimmable by pulse width modulation (PWM)• Integrated current source to stabilise luminous flux• Wide 140° distribution of light for uniform illumination• Attached with premounted thermally conductivedouble-sided adhesive tape• Connection: Cable 200 mmÊÊFor product data sheet go to www.tridonic.com,or available on requestTechnical dataAmbient temperature ta -30 ... +40 °Ctc point1 75 °CÈProduct matrix, page 20Standards, page 20Colour temperatures and tolerances, page 132Ordering dataColourColourtemperatureTypeArticle number6 light points per moduleDaylight white 6,500 K P130-2 DL 89600745Neutral white 4,200 K P130-2 NW 89600746Warm white 3,000 K P130-2 WW 89600747Gold 2,700 K P130-2 GOLD 89600744Cool meat – P130-2 CM2 89600786Packaging: 20 pieces/cartonSpecific technical dataType Typ. luminous flux 2 Colour rendering index Ra/Rff Supply voltage DC4 Power 26 light points per moduleP130-2 DL 106 lm > 75 24 V 3 WP130-2 NW > 80 24 V 3 WP130-2 WW 81 lm > 80 24 V 3 WP130-2 GOLD 5 55 lm > 90 24 V 3 WP130-2 CM2 5 74 lm > 80 3 24 V 3 W1 R th, j-hs= Thermal Resistance (Junction – Heat Sink). Exceeding the max. temperature limits leads to a reduced life or the module can be damaged.Measuring of the temperature at the tc-point in the thermally stable state with a temperature sensor.2 Tolerance range for optical and electrical data: ±15 %.3 Rff (Cool meat): special colour rendering index for illuminating meat and meat products to DIN 10504.4 Exceeding the max. operating voltage leads to an overload on the ustrip. This may in turn result in a reduction in lifetime or evenin destruction. Tolerance range for the supply voltage: 12 V: +2 V / -0 V; 24 V: +2 V / -0 V.5 Gold: light colour for cheese and pastries, Cool meat: light colour for fresh meat and sausages.All values at ta = 25 °C.62 www.tridonic.comT Catalogue 2010