Accessing the Network Camera - Tecnoalarm

VIVOTEKHTTP Advanced ModeTo utilize HTTP authentication, make sure that your have set a password for the Network Camera first;please refer to Security on page 29 for details.Authentication: Depending on your network security requirements, the Network Camera provides twotypes of security settings for an HTTP transaction: basic and digest.If basic authentication is selected, the password is sent in plain text format, where there is a potentialrisk of being intercepted. If digest authentication is selected, user credentials are encrypted using MD5algorithm and thus provide better protection against unauthorized access.HTTP port / Secondary HTTP port: By default, the HTTP port is set to 80 and the secondary HTTP portis set to 8080. There can be assigned to another port number between 1025 and 65535. If the ports areincorrectly assigned, the following warning messages will be displayed:To access the Network Camera on the LAN, both the HTTP port and secondary HTTP port can be usedto access the Network Camera. For example, when the HTTP port is set to 80 and the secondary HTTPport is set to 8080, refer to the list below for the Network Camera’s IP address.LANhttp://192.168.4.160 orhttp://192.168.4.160:8080Access name for stream 1 / Access name for stream 2: The access name is used to differentiate thestreaming source.When using Mozilla Firefox or Netscape to access the Network Camera and the video mode is set toJPEG, users will receive video comprised of continuous JPEG images. This technology, known as “serverpush”, allows the Network Camera to feed live pictures to Mozilla Firefox and Netscape.46 - User's Manual