EMPIRE - White Mountain Hearth

BUILT-IN FIREPLACE INSTALLATIONBuilt-In Fireplace InstallationBuilt-in installation of this fireplace involves installing the fireplaceRough Opening for Installing in Cornerinto a framed-in enclosure. This makes the front of the fireplaceflush with a wall. If installing a mantel above the fireplace, youmust follow the clearances shown in Figure 9. Follow the instructionsbelow to install the fireplace in this manner.Frame in rough opening. Use dimensions show in Figure 1 for aconventional rough opening. Use dimensions shown in Figure 2for corner rough opening. Be sure to provide gas line for fireplaceand electrical power for optional blower assembly.1. Attach two nailing flanges to firebox sides with two 10 x 1/2"screws for each nailing flange.2. Gas line connections must be made at this time. When facingthe appliance, the gas supply will enter on the right-hand side.See "Gas Supply" page 11.3. Insert fireplace into enclosure.4. Attach nailing flanges to framing with a screw or nail.5. Finished wall surface will be flush to the leading edge of fireplacetop and sides.6. Installation of built-in fireplace is completed. Figure 2Rough Opening for Installing in WallFigure 3Figure 1Page 630816-1-0912