ShoreTel® Programmable Buttons User Guide Supplement To IP

More documents

Recommendations

Info

HOW TO TIE A USER TO A PHONE At this point, you should have successfully associated the button box with an IP phone. If you have not already done so, you may want to associate a user with that same IP phone to ensure that the correct person has access to the new button box. To assign a user to the phone using ShoreWare Director, follow the procedure below: 8 Step 1 Click on the Individual Users link to display a list of users on this system. Step 2 From the list of names that appears in the left-most column, click on the name of the user who will be associated with the IP phone that will act as the “parent” of the button box. Figure 3 Select the MAC address of the parent phone
Step 3 Select the MAC address of the user’s phone from the Home Port - IP Phones drop-down menu, as shown. Step 4 Click Save to store your changes. You are now ready to move on to the next section, which provides information on programming the buttons on your BB24 button box. 9
Page 1 and 2: ShoreTel® Programmable Buttons Use
Page 3: Contents OVERVIEW. . . . . . . . .
Page 6 and 7: HOW TO ASSOCIATE A BUTTON BOX WITH
Page 10 and 11: HOW TO PROGRAM BUTTONS FROM DIRECTO
Page 12 and 13: Figure 5 Access the User Group via
Page 14 and 15: HOW TO PROGRAM BUTTONS FROM AN IP P
Page 16 and 17: Table 1 Supported Functions Functio
Page 18 and 19: COLOR AND BLINK PATTERNS FOR CUSTOM
Page 20 and 21: 20 Icon Blink Icon LED Color and Bl
Page 22: 22 Icon Blink Icon LED Color and Bl

ShoreTel® Programmable Buttons User Guide Supplement To IP

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?