CS600/CS500/ IS200 - Graphtec

3. PREPARING TO OPERATE THE SCANNER3. PREPARING TO OPERATE THE SCANNER3.1 System RequirementsThe minimum system requirements for running the scanner’s hardware and software arelisted below.Operating system: Windows 2000 Professional/XP Professional/XP Home EditionCPU: Pentium III/4Memory: 32 MB or moreMonitor: 1024 × 768 pixels, 256 colors or moreEnough disk space to store dataMouseInterface: USB interface* 1 (that comes standard with your computer) or Ethernetinterface (10 BASE-T/100 BASE-TX)* 1 If your scanner does not operate with the USB interface that comes with your computer,or if your computer does not have a USB 2.0 interface, please contact your salesrepresentative or nearest Graphtec vendor for information on supported add-on cards.Recommended environmentFor binary monochrome dataCPU: Pentium 4Memory: 64 MB or moreUSB 2.0 interface (that comes standard with your computer)Ethernet interface (100 BASE-TX)For grayscale dataCPU: Pentium 4Memory: 256 MB or moreMonitor: 1024 × 768 pixels, High Color or higher resolutionUSB 2.0 interface (that comes standard with your computer)Ethernet interface (100 BASE-TX)For 8-bit/24-bit color data (CS600/CS500/IS200-PRO* 2 only)CPU: Pentium 4Memory: 512 MB or moreMonitor: 1024 × 768 pixels, True Color or higherUSB 2.0 interface (that comes standard with your computer)Ethernet interface (100 BASE-TX)* 2 8-bit color onlyThe system configuration should correspond to the recommended specifications listedhere, in order to ensure the optimum capabilities of the scanner.Use with a system configuration below the recommended specifications will affect thescanning speed and prevent the scanner from operating to its specified capabilities.To edit an A1-size or larger grayscale document with a resolution of 400 dpi or higher,or a color document, you may need more than the recommended memory sizes above.Depending on the type of document, you may not be able to scan in the documenteven if you increase the memory size.CS600/CS500/IS200 3 – 1