Manual - Xpress Platforms

Hardware SetupBack PanelMouse/KeyboardCoaxialS/PDIF-OutLANLine-In RS-OutClearCMOSButtonLine-OutCS-OutOpticalS/PDIF-OutUSB 2.0 PortUSB 3.0 PortMicSS-Out▶ Mouse/ KeyboardThe standard PS/2 ® mouse/keyboard DIN connector is for a PS/2 ® mouse/keyboard.▶Clear CMOS ButtonThere is a CMOS RAM on board that has a power supply from external battery to keepthe system configuration data. With the CMOS RAM, the system can automaticallyboot OS every time it is turned on. If you want to clear the system configuration, usethe button to clear data. Press the button to clear the data.Important• Make sure that you power off the system before clearing CMOS data.• After pressing this button to clear CMOS data in power off (G3) state, the system willboot automatically.▶Coaxial S/PDIF-OutThis SPDIF (Sony & Philips Digital Interconnect Format) connector is provided for digitalaudio transmission to external speakers through a coaxial cable.▶Optical S/PDIF-OutThis SPDIF (Sony & Philips Digital Interconnect Format) connector is provided for digitalaudio transmission to external speakers through an optical fiber cable.▶USB 2.0 PortThe USB (Universal Serial Bus) port is for attaching USB devices such as keyboard,mouse, or other USB-compatible devices. Supports data transfer rate up to 480Mbit/s(Hi-Speed).2-10