Manual - Xpress Platforms

AMD RAID6.The message will show up on the bottom, press any key to use maximum capacityor press [Ctrl-Y] to modify array capacity manually.Important• The default capacity is the full capacity of the selected hard drives.• If you allocate the first LD capacity manually, you can create second LD with remainingcapacity of the selected hard drives.7.The LD creation is done, the screen shows the LD information as below.Press ESCkey to the main screen.8.Press ESC key to exit the utility, a message “System is going to REBOOT! Are YouSure?” will display, answer “Y” to exit it and the system will reboot.B-6