You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Hardware SetupConnectorsSerial ATA Connector: SATA1~6This connector is a high-speed Serial ATA interface port. Each connector can connectto one Serial ATA device.* The MB layout in this figure is for reference only.SATA2SATA1SATA4SATA3SATA6SATA5SATA1~6 (6Gb/s)supported by SB950ImportantPlease do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss mayoccur during transmission.Chassis Intrusion Connector: JCI1This connector connects to the chassis intrusion switch cable. If the chassis is opened,the chassis intrusion mechanism will be activated. The system will record this statusand show a warning message on the screen. To clear the warning, you must enter theBIOS utility and clear the record.2.Ground1.CINTRU2-12