You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4-4. Reverb Bypass<br />
This function decides whether to bypass the system effect’s reverb<br />
or not.<br />
UT TG MASTER<br />
ReverbBypass=off q<br />
q ReverbBypass (Reverb Bypass)<br />
off: Does not bypass (functions). Normal operation.<br />
on: Bypasses. Reverb will not be applied to the voice.<br />
5. MAP (<strong>Drum</strong> Map) Group<br />
Utility Mode<br />
This sub-mode is used to edit the User <strong>Drum</strong> Map. This mode is<br />
divided into the following 9 pages.<br />
5-1. <strong>Voice</strong> ................................................................ 35<br />
5-2. Volume, Pan .................................................... 36<br />
5-3. Tuning .............................................................. 36<br />
5-4. Layer Balance.................................................. 36<br />
5-5. Decay, Cutoff Frequency ................................. 36<br />
5-6. Reverb Send .................................................... 36<br />
5-7. Alternate Group, Key Assign Mode ................. 37<br />
5-8. Key Off Enable ................................................ 37<br />
5-9. Map Copy ........................................................ 37<br />
* When a User <strong>Drum</strong> Kit (No. 49-80) is selected, the User <strong>Drum</strong><br />
Map is the data that is used to set the note number’s voice, etc.,<br />
that is not assigned to the drum kit’s pad input. Therefore, when a<br />
preset drum kit is selected the User <strong>Drum</strong> Map will not be used<br />
(the preset drum map will be used) so settings for functions [5-1]<br />
to [5-8] that appear in the display can not be carried out.<br />
UT MAP N= 0C -2<br />
( Preset Map )<br />
Also, settings cannot be carried out for the following functions [5-<br />
1] to [5-8] when the note numbers for the currently selected drum<br />
kit are already assigned/set.<br />
UT MAP N= 0C -2<br />
( <strong>Drum</strong>kit Data )<br />
5-1. <strong>Voice</strong><br />
This creates a list that assigns a drum voice for each MIDI note<br />
number. Which MIDI note number q will be received and which<br />
drum voice w will be sounded.<br />
UT MAP N= 0C -2<br />
=K/000 NoAssign<br />
w e<br />
q N (MIDI Note Number)<br />
[Range] 0-127 (C-2 to G8)<br />
Sets the MIDI note number. Displays the note number and note<br />
name.<br />
* According to the setting of the Utility mode’s [1-1. Learn Mode]<br />
(P. 28) you can appoint the MIDI note number with key on input<br />
from the MIDI IN/TO HOST jacks.<br />
w <strong>Voice</strong> Category<br />
[Range] K, k, S, s, T, t, C, H, P, E, e, L, m<br />
Selects the drum voice category.<br />
Refer to <strong>Drum</strong> Kit <strong>Voice</strong> Edit Mode’s [1-1. <strong>Voice</strong>] (P. 17).<br />
q<br />
35