Napco Gemini LCD Keypad - Microtec

More documents

Recommendations

Info

Your alarm specialist may haveprogrammed your system to bemonitored by a central station. Thebuilt-in digital communicator cantransmit emergency signals andstatus reports to the central station24 hours a day.Communicator FeaturesAbort Delay. Ask your installerwhich of your zones have abortdelay, a delay that enables you toreset the system before itcommunicates to the central station.Regular Burglary (Non-24-Hour)Zone. Reports are aborted bydisarming within the delay period.24-Hour Zones and zonesprogrammed to report restores mustbe restored first, then the panelarmed and disarmed, all within thedelay period.CENTRAL STATION MONITORINGOpening and/or ClosingReporting. Your system can notifythe central station every time it isdisarmed or armed. Any or all of upto 96 different users can each beidentified. If your system reports onarming (Closing Report), the centralstation will acknowledge arming.This will signal at the keypad as a“ringback” beep. Note: If theringback signal is not heard, call forservice.20
ADVANCED FEATURESSecurity Bypass/Unbypass(Security Bypass programmed? qYES qNO).In high-security applications, zones may be bypassed (or unbypassed) only if a valid code is entered first, as follows:1 Enter a User Code valid for bypass, then press B .2 Press B then the zone number (or vice versa) to deactivate that zone.Similarly, a bypassed zone may be unbypassed using the same procedure.Start Exit Time After Ringback (for Commercial Burglary Systems only)(Optional - Start Exit Time programmed? qYES qNO).If your system reports to a central station, your panel may have been programmed to start exit delay after the central-station ringback(verification) signal. Then, after arming, your system will communicate to the central station. After the central station acknowledges receipt(ringback), exit delay will start. If ringback is not heard within about 30 seconds, a communication problem may exist; call for service.Function 11 (Start Exit Time) may then be used to manually start the exit delay, however reporting capability may be sacrificed. (If yoursystem does not report or the ringback feature was not programmed, exit delay will start as soon as your code is entered. Also note that ifan exception window is programmed, and the closing is within that window, no ringback is provided. Ask your alarm professional if thisfeature is enabled.)Exit-Delay Restart(Exit-Delay Restart programmed? qYES qNO).On arming, the programmed exit delay will start. After the exit door has been opened and then closed, exit delay will change to 60 seconds.Thus, a long exit delay may be programmed, which will immediately be reduced to 60 seconds upon exiting. If re-entry occurs during that 60seconds, exit delay will restart once again (and only once again) at 60 seconds. If so programmed, re-entry within 60 seconds after exitdelay has expired, will cause the alarm to sound a 2-second warning (in addition to the entry sounder) to remind the user to disarm.21
Page 1: OPERATING GUIDE for yourGEM-RP1CAe2
Page 5 and 6: 12345Window. Displays system status
Page 7: SETTING THE ALARM (ARMING) WHEN LEA
Page 10 and 11: TURNING OFF THE ALARM (DISARMING) W
Page 12 and 13: Preparing a Fire Escape PlanEven wi
Page 15 and 16: KEYPAD FUNCTIONSThe keypad can prov
Page 17 and 18: RESETSYS TRBLY/NKEYPAD FUNCTIONSRes
Page 19: ACTIVATEPROGRAMY/NKEYPAD FUNCTIONSA
Page 23 and 24: PROGRAMMING (OPTIONAL)Reviewing a P
Page 25 and 26: PROGRAMMING (OPTIONAL)Programming t
Page 27 and 28: KEYPAD MESSAGES****ALARM****Alarm c
Page 29 and 30: GLOSSARYFollowing are brief descrip
Page 31 and 32: System Trouble: A problem (lowbatte
Page 33 and 34: SYSTEM TROUBLE ERROR CODESTroubleIn
Page 35 and 36: SYSTEM TROUBLE ERROR CODESTroubleIn
Page 37 and 38: What do I do if...TROUBLESHOOTINGI
Page 39 and 40: NOTES39

Napco Gemini LCD Keypad - Microtec

Create successful ePaper yourself

Delete template?

Save as template?