Napco Gemini LCD Keypad - Microtec

KEYPAD MESSAGESThe keypad can display the following functional messages. Other diagnostic messages are available for theinstaller or servicer. Should any unfamiliar message appear, call your dealer for service.SYSTEM READY(DATE) (TIME)PLEASE WAITFOR RINGBACKCAll zones operating; system can be armed. If displayed, “C” denotes Chime Mode on.(Note: This message may have been customized by your installer.)Panel reporting to central station on arming. If necessary, wait for ringback signal beforeexiting.EXIT TIME XXXPLEASE LEAVEENTRY TIME XXXDISARM SYSTEMSYSTEM ARMED I(DATE) (TIME)SI*ZONES FAULTED*ZONES NOTNORMAL*DAY ZONE TRBL*Exit delay in progress. XXX denotes exit time remaining, in seconds. If displayed, “S”indicates Service Code active; I indicates arming with Instant protection.Entry delay in progress. XXX shows entry time remaining, in seconds.System armed. If displayed, “I” indicates arming with Instant protection.Zones not secured (doors or windows may be open). Faulted zone(s) will scroll.Arming attempted with faulted zone. The display will scroll the zone faults. Secure thezone(s) and arm system.(With pulsing sounder.) Trouble condition on a Day Zone (followed by one or more zonedescriptions). Press the C button to silence sounder.26