Napco Gemini LCD Keypad - Microtec

30Exit/Entry Delays: Separatedelays that let you exit andenter your premises withoutsetting off an alarm when thesystem is armed.INTERIOR Button: BypassesInterior Zones on arming (seeZones - Interior Zones).Instant Protection: Armingwithout entry delay using theF button while remainingon the premises.Keypad: Puts control-panelfunctions at your fingertips. Itcan be mounted anywhere inyour premises.Manager's Mode: In a partitionedsystem, a low-securityoperating mode that allowsarming by area.Panic Buttons: Blue buttons onthe keypad (G and 7,8 or 9). If enabled,GLOSSARYpressing G together with7, 8 or 9 will alertthe central station of a fire,auxiliary, or police emergency.Partitioned System: A systemthat has been subdivided intotwo or more (up to eight)independent subsystems(areas).Pre-Alarm Warning: A keypadsounder alert of an impendingalarm. This option isprogrammable by zone for thesame duration as thatprogrammed for Abort Delay(see Abort Delay).Report: A transmission to acentral station notifying of achange in the status of thesystem (alarm, trouble, lowbattery, etc.).RF Low Battery: (Wireless systemsonly) Weak transmitterbattery.F Check In: (Wireless systemsonly) Periodic test report fromtransmitter (if a report is notreceived on time, asupervisory-failure systemtrouble will result).Ringback: A beep after armingverifying the central-station'sreceipt of a closing report.Service Code: A code intendedfor temporary use.Sounder - A local warning deviceat each keypad to alert that (a)entry delay has started; (b) anattempt was made to arm witha zone in trouble; (c) a Day-Zone condition exists (seeZones: Day Zone); (d) 10seconds exit time remaining;(e) invalid code entered; or (f)central station acknowledgedarming (see Ringback).