Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
liteRAIL SYSTEM<br />
LR 9.0<br />
LR 7.0 AC<br />
LR 4.5<br />
Due to three different mid parts, LITERAIL covers a boot<br />
sole range of 199 to 347 mm.<br />
Literail S 199 - 283 mm<br />
Literail M 239 - 323 mm<br />
Literail L 263 - 347 mm<br />
MOUNTING - Bindings<br />
Mounting and adjusting the LR bindings is extremely<br />
simple and can be done without any additional tool. Make<br />
sure that the boot meets the international standards and is<br />
free of any functional damage. Take the binding parts out<br />
of the box and follow the steps on the instruction leaflet.<br />
Determine the boot sole length with the HEAD/ TYROLIA<br />
rental caliper (Art. no. 162 61 7).<br />
pict 10<br />
First you have to open the toe-lever and slide the toe on<br />
the rail from the front (pict 1 1).<br />
pict 1 1<br />
Version Boot sole range<br />
Lock at the appropriate boot sole length and close the<br />
lever (pict 12).<br />
pict 12<br />
Rental Ski Binding | 19<br />
Now hook the brake into the heel housing (pict 13).<br />
pict 13<br />
Then you can open the lever and slide the heel on the rail<br />
from the back! (pict 14).<br />
pict 14<br />
Simply lock it at the appropriate boot sole marking by<br />
closing the lever - and you are ready to go (pict 15).<br />
pict 15<br />
Finally, check the forward pressure, by placing a boot into<br />
the binding. If you have followed all steps correctly, the<br />
indicator should rest in the marked area (pict 16).<br />
pict 16
Change language