RENTAL Manual 2010 Engl. - Tyrolia

42 | Rental Ski Binding
Use of the Equipment
Rental Form
1. Verify that the customer has provided all required information.
Make sure everything is legible.
2. Under the equipment column:
mark if the equipment is rented or owned;
enter ID # or description.
3. Mark if the customer wants to insure his equipment.
4. In the weight column:
circle the group that contains the customer’s weight.
5. In the height column:
circle the group that contains the customer’s height.
6. Select the skier code closest to the top.
7. Move on the skier code column according to the skier type.
8. Move on the skier code column according to the age.
9. Circle the final skier code
10. Enter the final skier code into the box on the left hand side of the form.
11. Circle the sole length column that contains the sole length of the boot used.
12. Circle the Initial Indicator Value.
13. Determine the TYROLIA Single Code and enter it in the box.
14. Mark if this is an Adult or a Junior Code.
15. Determine the Final Indicator Setting, adjust the binding accordingly and record the settings on the form.
16. Confirm with your signature that you have adjusted the binding as recorded on the form.
Please see page 43 for a sample.
It is mandatory that you follow the above procedure exactly.
Before dispatching the equipment make sure that the customer:
• has read and understood the form
• initialled and signed the form in all necessary places
• If the customer requests special settings, follow the procedures for ·
Discretionary Settings/troubleshooting at page 30/31.