You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
94 | Rental Snowboard<br />
Maintenance Instruction<br />
Visual Inspection of Rental<br />
Equipment<br />
In assembling a system for the boarder, it is the responsibility<br />
of the rental company to inspect and evaluate<br />
each equipment component before each rental process.<br />
This inspection checklist should be followed before any<br />
mounting or adjusting is performed.<br />
Check suitability<br />
• Is the chosen rental equipment appropriate for the<br />
boarder’s ability?<br />
• The binding must be compatible with the customer’s<br />
boots/board.<br />
Check the condition of the<br />
Rental Equipment<br />
• Are all parts present and in working order?<br />
• Are all mounting screws present and tightened<br />
securely? (only turn screws clockwise to prevent<br />
damage to screw locks).<br />
• Does the equipment show signs of contamination?<br />
Maintenance of boards<br />
• Store in dry room after use.<br />
• Grind base & edges from time to time<br />
• Hot wax the boards after max. 7 days of use<br />
Maintenance of bindings<br />
• Store in dry room after use<br />
• Do not expose to extreme temperature fluctuations<br />
• Do not let the bindings get dirty, especially the buckles<br />
and the toolfree system<br />
• Do not expose to solvents or chemicals<br />
• Release binding from board for storing to make sure<br />
the toolfree system/binding can dry<br />
Maintenance of boots<br />
• Store in dry room after use<br />
• Dry boots after every use, for faster drying pull out<br />
liner<br />
• Keep boot clean<br />
• If needed, machine wash liner with cold water and<br />
spray inside of liner anti-odor spray<br />
Safety instructions<br />
We recommend using HEAD boots for the HEAD bindings.<br />
Boots from other brands can be used if they are compatible<br />
and properly fit into to the bindings.<br />
The rental company is to instruct the renter & boarder on<br />
• All the board/boot/binding functions and explain safe<br />
handling for during and after use:<br />
• Snowboard bindings are not equipped with a release<br />
function<br />
• Adjustments are only to be performed by the rental<br />
company<br />
• Check if the equipment is in working order before any<br />
ride and do not use in case of any defects<br />
• Safety leashes are to be used at all times when riding<br />
• Stomp pads are to be used at all times<br />
• All ratchets are to be securely locked in the designated<br />
buckles when riding<br />
• All ratchets and buckles are free of ice when riding<br />
• All screws are tightened securely when riding<br />
• The boot is to be fixed properly in the binding so that<br />
it cannot release when riding<br />
• Only to ride the Step-X4 bindings if all 4 hooks of the<br />
boot are securely locked into the binding<br />
• Locally appropriate conduct and laws to be respected<br />
on and off the slopes.<br />
• The risks of snowboarding<br />
• General safety measures of snowboarding sports
Change language