Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Mounting Rental<br />
speed disc<br />
Pic #1<br />
Pic #2<br />
Pic #3<br />
Colour of screw Screw length<br />
USE POZI #3 BIT<br />
Silver M6 x17<br />
Gold M6 x18<br />
CHECK<br />
TIGHTNESS<br />
REGULARLY<br />
USE RIGHT LENGTH<br />
TIGHTEN AT LEAST<br />
3 TURNS IN THREAT<br />
Rental Snowboard | 93<br />
USE LOCKTITE® 243<br />
OR NEW INSERT SCREW<br />
AFTER REMOUNTING<br />
1. Place the discs on the Board in a way that the opening levers point to the end of the Board respectively (pict 1).<br />
2. When assembling, watch out that the enclosed screws (pict 2) are tightened firmly (at least 4 Nm). When choosing<br />
the appropriate screw, make sure that the screws are turned at least 3 threads into the insert of the Board and<br />
do not touch the insert ground. When assembling/disassembling the screws must be tightened/loosened using a<br />
POZI #3 screwdriver.<br />
3. The screws must be checked regularly as to their tight fit. After disassembling the screws, they must be secured<br />
against self-loosening with "Loctite® 243, in case they are being reused. Alternatively, new insert screws from<br />
HEAD can be acquired as spare part.
Change language